IP Gear Claro 30A A16 10

IP Gear Claro-30A Gateway; 8FXS+8FXO Ports, 10 VoIP Channels
IP Gear Claro-30 Series VoIP Gateways are the primary point-to-point call routing elucidations that brings multi-faceted cost controls devoid of sacrificing call quality or data protection. Now you benefit from excellent audio quality in an easy-to-install and preserve affordable solution.

The Claro-30A Analog VoIP Gateway holds up both analog FXS and FXO telephony interfaces. All you perform is plug the PBX trunk analog lines into one side of the Claro-30a Gateway, the PSTN Central Office lines into the supplementary, and then attach the Claro-30A Gateway to the IP network. Your existing tools are completely leveraged, devoid of PBX customization, and with no the expense of extra lines or voice cards.

PSTN failover (3-legs mode)
PSTN failover (3-legs mode) is available in IP Gear Claro-30A-A16-10.

Analog Ports
Number of FXS Ports of IP Gear Claro-30A-A16-10 is 8 RJ-11 connectors.
Max. Voice Channels of this card is 10.

LAN Interface
High quality 10/100 Base-T Ethernet auto sensing of IP Gear Claro-30A-A16-10 is RJ-45 connector (IEEE 802.3).

Call Handling Features

• IP Gear Claro-30A-A16-10 has H.323 V4 support.
• IP Gear Claro-30A-A16-10 also has SIP V2 support.
• Dynamic protocol selection (SIP, H.323) on a call-by-call basis is included in IP Gear Claro-30A-A16-10.
• Discretionary, automatic least cost routing opportunities (carrier selection; hop-off).
• Hop-on with validation and auto-dialing support.
• The best quality of IP Gear Claro-30A-A16-10 is Smart QoS-driven automatic multi-path call switching.
• Pass-through to user-selected PSTN purposes.
• Automatic call type finding voice/fax.
• Public, personal, and shortened dial plan hold the Rule based numbering management (RBNM).
• Automatic stripping and adding of digits to dialed numbers.
• Discretionary, automatic hop-off support also include in the IP Gear Claro-30A-A16-10.
• IP Gear Claro-30A-A16-10 comprises on NAT (network address translation) traversal.
• IP Gear Claro-30A-A16-10 also provides the high Voice Quality with IP TOS.
• Diff Serv of the IP Gear Claro-30A-A16-10 is Bad frame interpolation.

Multenet PROD0201

The Ether PAD Duo is a versatile device that can be used in stand-alone, DIN rail or 19" rack-mount applications. It requires an exterior power supply and has a 10/100 Base-T Ethernet interface and two RS232 /RS422/RS485 serial interfaces.

This product range includes the following hardware configurations:
- Manual or auto selectable 10/100 Base-T Ethernet to two software selectable RS232, RS422 or RS485 serial ports.

And the following key-enabled software options are accessible:
Data Logging, Scripting, PPP, Routing, Modbus Scripting, Modbus Bridge

Features
• Apparatus network connectivity via UDP/IP, TCP/IP with SNMP MIB II protocol suite.
• Data logging capacity with attachment mail option.
• Apparatus management via Telnet, Boot/TFTP, Web Browser, SNMP, Built-in Serial configuration interface. Windows and Linux configuration Utility.
• Flash memory for convenient software updates via FTP.
• Low charge and Compact Size.
• Modbus Bridge and Scripting.
• Dynamic Routing and PPP-over-Serial.
• Numerous Network connections allowed to the same Serial data stream.
• DIN Rail mounting and 19" rack mounting kits accessible.

Software Specification:
Network Protocols: TCP/IP, UDP/IP, Boot/DHCP, TFTP, ICMP, ARP, Proxy ARP, Telnet, FTP (client & server), HTTP, SMTP, DNS, PPP, RIP, SNMP (v1), Modbus/TCP, Modbus/UDP, and Redirector (RFC2217)
Serial Protocols: Raw, Redirector, TC500, Modbus/RTU, Modbus/ASCII
Parity: None, Even, Odd
Flow Control: None, Hardware (RTS/CTS), Software (XON, XOFF)
Data Size: 5, 6, 7, 8
Stop bits: 1, 2

Data Throughput: 300 to 115200 Baud per port
• Web Server
• Debug and diagnostic tools
• Password protection
• Firmware upgrading over serial Kermit or network
• Multiple concurrent network connections (50 max)

Hardware Specification:
• ARM7 processor
• 8MB RAM and 4MB Flash
• 10/100 Base-T Ethernet line interface
• RS232/RS422/RS485 Serial interfaces
• RS232 Serial configuration interface
• LED indication for Ethernet and Serial port status and indicators for Ether PAD health

Physical Specifications:
• Ethernet: RJ45 connector (10/100 Base-T)
• Serial port (RS232/RS422/RS485) is DB9 male connector
• Serial Configuration port (RS232) is RJ12 connector
• Enclosure of this card is Aluminum extrusion and end plates
• Dimensions of this card is 127mm x 104mm x 50mm
• Weight is just 400 grams
• PSU Weight is 600 grams
• Temperature Range Operating is 0 degrees Celsius to 60 degrees Celsius
• Temperature Range Storage: minus 20 degrees Celsius to 85 degrees Celsius

Electrical Specifications:
Power requirement of this card is 5W - 10V-30V DC or 10V-20V AC
Connector: IBM kind at rear and terminal type on the front plate for DIN Rail PSU connection
Power supply adapter accessible as an option

Multenet PROD0200

Multenet Ether PAD Lite Serial-Ethernet Device Server; (1 x RS232/422/485)

Ether PAD Lite is a versatile, entry-level connectivity device that can be used in stand-alone, DIN rail or 19” rack-mount applications. It have need of an external power supply and has a 10/100 Base-T Ethernet interface and a RS232/RS422/RS485 serial interface connecting an asynchronous serial apparatus to an Ethernet network.

Ether PAD Lite features include:

• Apparatus network connectivity via UDP/IP, TCP/IP with SNMP MIB II protocol suite.
• Apparatus management via Telnet, Boot/TFTP, Web Browser, SNMP, Windows and Linux configuration Utility
• Flash memory for convenient software updates.
• Low charge and Compact Size.
• Modbus Slave Bridge linking Modbus TCP/UDP to Modbus ASCII/RTU.
• Numerous Network connections allowed to the same Serial data stream.
• DIN Rail mounting and 19” rack mounting kits accessible.

Software Specification

• Network Protocols: TCP/IP, UDP/IP, Boot/DHCP, TFTP, ICMP, ARP, Proxy ARP, Telnet, HTTP, SMTP, DNS, SNMP (v1), Modbus/TCP, Modbus/UDP, and Redirector (RFC2217)
• Serial Protocols: Raw, Redirector, TC500, Modbus/RTU and Modbus/ASCII
• Parity: None, Even, Odd, Mark along with Space
• Flow Control: None, Hardware (RTS /CTS), Software (XON and XOFF)
• Data Size: 5, 6, 7, 8
• Stop bits: 1 and 2
• Data Throughput: 300 to 115200 Baud per port
• Web Server (configuration)
• Password protection
• Firmware upgrading over serial Kermit
• Numerous concurrent network connections (5 max)

Hardware Specification

• ARM7 processor
• 8MB RAM and 1MB Flash
• 10/100 Base-T Ethernet line interface
• RS232/RS422/RS485 is Serial interface
• LED signal for Ethernet & Serial port status, and indicators for health.

Physical Specifications

Connectivity:

• Ethernet (10/100 Base-T): RJ45
• Serial port (RS232/RS422/RS485): DB9 male
• Enclosure: Black anodized aluminum extrusion with aluminum faceplates.
• Dimensions of this card is 127mm x 104mm x 50mm
• Card’s Weight is just 430g
• Temperature Range Operating: 0 degrees Celsius to 60 degrees Celsius
• Temperature Range Storage: Minus 20 degrees Celsius to 85 degrees Celsius.

Electrical Specifications

• Power requirement: External Power supply is 5W - 10V-30V DC or 10V-20V AC (power supply adapter accessible as an option). Power connector on front for DIN Rail PSU connection.
• Standards Compliance:UL, CE

Part Numbers

• Ether PAD Lite: PROD0200
• Euro Power Adapter (220V)’s no. is PROD0902
• US Power Adapter (120V) is PROD0903
• DIN Rail Mounting Kit is PROD0206
• 19” Rack Mounting Kit is PROD0207

Product specifications are subject to alteration without notice

Multenet PROD0110

Multenet Pocket PAD Java Device Server with embedded Java Virtual Machine

Pocket PAD Java is a low charge serial device server that supports an embedded Java Virtual Machine. This innovation is perfect for the user who wants to run custom Java applications straightforwardly on the device. The Pocket PAD Java has four RS232 Serial ports and one Ethernet port which is 10/100 BaseT auto-sensing.

The light-weight Pocket PAD can be used as a stand-alone desktop or mounted on a DIN-rail.

This product array includes the following hardware configuration:

Four RS232 serial to10/100 BaseT Ethernet

Features include:

• Device network connectivity via UDP/IP or else TCP/IP.
• Apparatus management via Telnet, DHCP/TFTP, Web Browser, SNMP (MIB II) and Built-in.

Serial configuration interface, Windows configuration Utility.

• Flash memory for convenient software updates.
• Low charge and Compact Size.
• Lightweight.
• Numerous Network connections allowed to the same Serial data stream.
• DIN Rail mounting kit accessible.
• Java Virtual Machine.

Software Specification

• Network Protocols: TCP/IP, UDP/IP, Boot/DHCP, TFTP, ICMP, ARP, Telnet, and HTTP, SNMP (v1 & v2)
• Serial Protocols is Raw, TC500 (BPS)
• Parity: None, Even, Odd, Mark and Space.
• Flow Control: Hardware (RTS /CTS), Software (XON /XOFF), None
• Data Size: 5, 6, 7, 8
• Stop bits: 1 and 2
• Data Throughput: 300 to 230400 Baud per port
• Web Server (Configuration)
• Password protection
• Software upgrading over serial Kermit
• Multiple simultaneous network connections (25 max)

Hardware Specification

• ARM9 processor
• 32MB RAM, along with 8MB Flash
• 10/100 Base-T Ethernet line interface
• Four RS232 Serial interfaces
• LED signal for Ethernet and Serial port position, Power & Heartbeat
• Detachable DIN-rail mounting bracket

Physical Specifications

Connectivity:

• Ethernet (10/100 Base-T): RJ45
• Serial port (RS232) of this card is 4x DB9 male
• Enclosure of this card is Poly Carbonate
• Dimensions of this card is 120mm x 90mm x 40mm
• Weight of this card is only 185g
• PSU Weight is 98g (Torpedo PSU)
• Temperature Range Operating of this card is 0 degrees Celsius to 60 degrees Celsius
• Temperature Range Storage is minus10 degrees Celsius to 70 degrees Celsius

Electrical Specifications

• Power requirement: External Power supply: 2W (5V DC)
• Consumption is 200mA

(Light-weight Torpedo Power Supply accessible as an option)

Multenet PROD0107

Multenet Pocket PAD 4 Device Server; (4 x RS232)

PocketPAD is a low charge Serial to Ethernet device server. This light weight apparatus can be used as stand-alone or mounted on a DIN rail. PocketPAD connects asynchronous serial apparatus to Ethernet networks.

PocketPAD is an apparatus that interconnects serial and Ethernet systems. The networked horde could have a server application polling for info from the serial unit, or a controller with an Ethernet port. PocketPAD® can be configured to be a server (Passive/Slave mode) or a horde (Active/Master mode). An utmost of 5 TCP and 5 UDP network applications can be configured on the PocketPAD. Every one TCP application can handle 5 socket connections (Total of 25 concurrent TCP socket connections at any one time).

PocketPAD Features include:

• Device network connectivity by the use of UDP/IP or TCP/IP.
• Apparatus management via Telnet, DHCP/TFTP, Web Browser, SNMP (MIB II), Built-in Serial configuration interface, Windows configuration Utility.
• Flash memory in favor of convenient software updates.
• Low charge and Compact Size.
• Lightweight.
• Numerous Network connections allowed to the same Serial data stream.
• DIN Rail mounting kit accessible.

Software Specification

Network Protocols: TCP/IP, UDP/IP, Boot/DHCP, TFTP, ICMP, ARP, Telnet, and HTTP, SNMP (v1 & v2)

Serial Protocols: Raw and TC500

Parity: None, Even, Odd, Mark and Space

Flow Control: Hardware (RTS/CTS), along with Software (XON, XOFF), None

Data Size: 5, 6, 7, 8

Stop bits: 1, 2

Data Throughput: 300 to 230400 Baud per port

1. Web Server (Configuration)
2. Password protection
3. Software upgrading over serial Kermit
4. Numerous concurrent network connections (25 max)

Hardware Specification

1. ARM9 processor
2. 8MB RAM and 4MB Flash
3. 10/100 Base-T Ethernet line interface (Auto detect)
4. Four RS232 Serial interfaces
5. LED signal for Ethernet and Serial port position, Power & Heartbeat

Physical Specifications Connectivity:

• Ethernet is (10/100 Base-T): RJ45
• Serial port is (RS-232/422/485): DB9 male
• Enclosure of this card is Polycarbonate
• Dimensions of this card is 120mm x 90mm x 40mm
• Weight is only 185g
• PSU Weight is 98g (Torpedo PSU)
• Temperature Range Operating is 0 degrees Celsius to 60 degrees Celsius
• Temperature Range Storage is minus10 degrees Celsius to 70 degrees Celsius
• Electrical Specifications
• Power requirement: External Power supply: 2W (5V DC)
• Consumption: 200mA
• (Light-weight Torpedo Power Supply available as a choice)

Part Numbers

• Pocket PAD 4 (4x RS232): PROD0107
• Pocket PAD 4 (3x RS232 +
• 1x RS232/RS422/RS485): PROD0108
• Euro PSU (220V): PROD0900
• US PSU (120V): PROD0901
• DIN Rail Mounting Kit: PROD0111

Product specifications are subject to amendment without notice.

Multenet PROD0101

Multenet Pocket PAD 1 Device Server; (1 x RS232/422/485)
PocketPAD is a low charge Serial to Ethernet device server. This light weight apparatus can be used as stand-alone or mounted on a DIN rail. PocketPAD connects asynchronous serial devices to Ethernet networks.

PocketPAD is an apparatus that interconnects serial and Ethernet systems. The networked horde could have a server application polling for info from the serial unit, or a controller with an Ethernet port. Pocket PAD® can be configured to be a server (Passive/Slave mode) or a host (Active/Master mode). An utmost of 5 TCP and 5 UDP network applications can be configured on the PocketPAD. Each TCP application can handle 5 socket connections (Total of 25 simultaneous TCP socket connections at any one time).

Multenet PROD0101 PocketPAD Features include:
One RS232/RS422/RS485 serial to10/100 Base-T Ethernet
Device network connectivity via UDP/IP or else TCP/IP.
Apparatus managing by the use of Telnet, DHCP/TFTP, Web Browser, SNMP (MIB II), and Built-in Serial arrangement interface along with Windows configuration Utility.
Flash memory for suitable software updates.
Low charge and Compact Size.
Lightweight.
Numerous Network connections allowed to the same Serial data stream.
DIN Rail mounting kit accessible.

Software Specification
Network Protocols: TCP/IP, UDP/IP, Boot/DHCP, TFTP, ICMP, ARP, Telnet, and HTTP, SNMP (v1 & v2)
Serial Protocols: Raw TC500 (BPS)
Parity: None, Even, Odd, Mark and Space
Flow Control: Hardware (RTS/CTS) along with Software (XON, XOFF), None
Data Size: 5, 6, 7, 8
Stop bits: 1, 2

Data Throughput: 300 -230400 Baud
1. Web Server (Configuration)
2. Password security
3. Software upgrading over serial Kermit
4. Multiple simultaneous network connections (25 max)

Hardware Specification
1. ARM9 processor
2. 8MB RAM, and 4MB Flash
3. 10/100 Base-T Ethernet line interface (Auto detect)
4. One RS232 Serial interface
5. RS422/RS485 Serial interface facilitate by internal DIP switches.
6. LED signal for Ethernet and Serial port status, Power & Heartbeat

7. Detachable DIN-rail mounting bracket

Multenet PROD0100

Multenet Pocket PAD 1 Device Server; (1 x RS232)
Pocket PAD is a small charge Serial to Ethernet device server. This low weight device can be used as stand-alone or build up on a DIN rail. Pocket PAD attaches asynchronous serial devices to Ethernet networks.

PocketPAD is a device that interrelates serial and Ethernet systems. The system host could have a server application polling for information from the serial unit, or a controller among an Ethernet port. PocketPAD® can be configured to be a server (Passive/Slave mode) or a host (Active/Master mode). An utmost of 5 TCP and 5 UDP network applications can be configured on the PocketPAD. Each TCP application can handle 5 socket acquaintances (Total of 25 parallel TCP socket connections at any one time).

Features
Device system connectivity via UDP/IP, TCP/IP.
Multenet PROD0100 offers device managing via Telnet, DHCP/TFTP, Web Browser, SNMP (MIB II), Built-in Serial arrangement interface, Windows configuration Utility.
Flash memory for suitable software updates.
Low charges and compact size.
Lightweight.
Several Network connections allowed to the same Serial data stream.
DIN Rail mounting kit accessible.

Specifications

Software Specification:
Network Protocols: TCP/IP, UDP/IP, Boot/DHCP, TFTP, ICMP, ARP, Telnet, and HTTP, SNMP (v1 & v2)
Multenet PROD0100’s specifications are Serial Protocols: Raw, TC500 (Burroughs Poll Select)
Parity: None, Even, Odd, Mark, Space
Its major specifications are Flow Control: Hardware (RTS/CTS), Software (XON, XOFF), none
Data Size: 5, 6, 7, 8
Stop bits: 1and 2
Multenet PROD0100’s specifications are Data Throughput: Up to 230400 Baud
Web Server (Configuration)
Its main specifications are Debug and diagnostic tools
Password protection
Firmware improve over serial Kermit
Multiple simultaneous network connections (25 max)

Hardware Specification:
ARM9 processor
8MB RAM and 4MB Flash
10/100 Base-T auto identify Ethernet interface
One RS232 Serial interface
Hardware selectable RS422/RS485 Serial interface on Pocket PAD 1 RS-232/422/485
LED indication for Ethernet, Serial & system status

Physical Specifications:
Ethernet (10/100 Base-T): RJ45 connector
Serial port: DB9 male connector
Enclosure: Opaque Green Polycarbonate
Dimensions of this card is 120mm x 90mm x 40mm
Weight is just 151 grams, 160 grams (RS-232/422/485 version)
PSU Weight is 150 grams
Temperature assortment operating: 0 degrees Celsius to 60 degrees Celsius
Temperature assortment Storage: minus10 degrees Celsius to 70 degrees Celsius

Electrical Specification:
Power requirement: 2W (5V DC)
Consumption: 250mA
A light weight switch mode desktop power supply is accessible. Compatible connector options are obtainable.

Addons
detachable DIN-rail Mounting KitMount your PocketPAD on a DIN Rail.