Multenet PROD0201

The Ether PAD Duo is a versatile device that can be used in stand-alone, DIN rail or 19" rack-mount applications. It requires an exterior power supply and has a 10/100 Base-T Ethernet interface and two RS232 /RS422/RS485 serial interfaces.

This product range includes the following hardware configurations:
- Manual or auto selectable 10/100 Base-T Ethernet to two software selectable RS232, RS422 or RS485 serial ports.

And the following key-enabled software options are accessible:
Data Logging, Scripting, PPP, Routing, Modbus Scripting, Modbus Bridge

Features
• Apparatus network connectivity via UDP/IP, TCP/IP with SNMP MIB II protocol suite.
• Data logging capacity with attachment mail option.
• Apparatus management via Telnet, Boot/TFTP, Web Browser, SNMP, Built-in Serial configuration interface. Windows and Linux configuration Utility.
• Flash memory for convenient software updates via FTP.
• Low charge and Compact Size.
• Modbus Bridge and Scripting.
• Dynamic Routing and PPP-over-Serial.
• Numerous Network connections allowed to the same Serial data stream.
• DIN Rail mounting and 19" rack mounting kits accessible.

Software Specification:
Network Protocols: TCP/IP, UDP/IP, Boot/DHCP, TFTP, ICMP, ARP, Proxy ARP, Telnet, FTP (client & server), HTTP, SMTP, DNS, PPP, RIP, SNMP (v1), Modbus/TCP, Modbus/UDP, and Redirector (RFC2217)
Serial Protocols: Raw, Redirector, TC500, Modbus/RTU, Modbus/ASCII
Parity: None, Even, Odd
Flow Control: None, Hardware (RTS/CTS), Software (XON, XOFF)
Data Size: 5, 6, 7, 8
Stop bits: 1, 2

Data Throughput: 300 to 115200 Baud per port
• Web Server
• Debug and diagnostic tools
• Password protection
• Firmware upgrading over serial Kermit or network
• Multiple concurrent network connections (50 max)

Hardware Specification:
• ARM7 processor
• 8MB RAM and 4MB Flash
• 10/100 Base-T Ethernet line interface
• RS232/RS422/RS485 Serial interfaces
• RS232 Serial configuration interface
• LED indication for Ethernet and Serial port status and indicators for Ether PAD health

Physical Specifications:
• Ethernet: RJ45 connector (10/100 Base-T)
• Serial port (RS232/RS422/RS485) is DB9 male connector
• Serial Configuration port (RS232) is RJ12 connector
• Enclosure of this card is Aluminum extrusion and end plates
• Dimensions of this card is 127mm x 104mm x 50mm
• Weight is just 400 grams
• PSU Weight is 600 grams
• Temperature Range Operating is 0 degrees Celsius to 60 degrees Celsius
• Temperature Range Storage: minus 20 degrees Celsius to 85 degrees Celsius

Electrical Specifications:
Power requirement of this card is 5W - 10V-30V DC or 10V-20V AC
Connector: IBM kind at rear and terminal type on the front plate for DIN Rail PSU connection
Power supply adapter accessible as an option