Voip Cards

IP Gear Claro 30A A16 10

2009-11-07T05:16:00.000-08:00

IP Gear Claro-30A Gateway; 8FXS+8FXO Ports, 10 VoIP Channels
IP Gear Claro-30 Series VoIP Gateways are the primary point-to-point call routing elucidations that brings multi-faceted cost controls devoid of sacrificing call quality or data protection. Now you benefit from excellent audio quality in an easy-to-install and preserve affordable solution.

The Claro-30A Analog VoIP Gateway holds up both analog FXS and FXO telephony interfaces. All you perform is plug the PBX trunk analog lines into one side of the Claro-30a Gateway, the PSTN Central Office lines into the supplementary, and then attach the Claro-30A Gateway to the IP network. Your existing tools are completely leveraged, devoid of PBX customization, and with no the expense of extra lines or voice cards.

PSTN failover (3-legs mode)
PSTN failover (3-legs mode) is available in IP Gear Claro-30A-A16-10.

Analog Ports
Number of FXS Ports of IP Gear Claro-30A-A16-10 is 8 RJ-11 connectors.
Max. Voice Channels of this card is 10.

LAN Interface
High quality 10/100 Base-T Ethernet auto sensing of IP Gear Claro-30A-A16-10 is RJ-45 connector (IEEE 802.3).

Call Handling Features

• IP Gear Claro-30A-A16-10 has H.323 V4 support.
• IP Gear Claro-30A-A16-10 also has SIP V2 support.
• Dynamic protocol selection (SIP, H.323) on a call-by-call basis is included in IP Gear Claro-30A-A16-10.
• Discretionary, automatic least cost routing opportunities (carrier selection; hop-off).
• Hop-on with validation and auto-dialing support.
• The best quality of IP Gear Claro-30A-A16-10 is Smart QoS-driven automatic multi-path call switching.
• Pass-through to user-selected PSTN purposes.
• Automatic call type finding voice/fax.
• Public, personal, and shortened dial plan hold the Rule based numbering management (RBNM).
• Automatic stripping and adding of digits to dialed numbers.
• Discretionary, automatic hop-off support also include in the IP Gear Claro-30A-A16-10.
• IP Gear Claro-30A-A16-10 comprises on NAT (network address translation) traversal.
• IP Gear Claro-30A-A16-10 also provides the high Voice Quality with IP TOS.
• Diff Serv of the IP Gear Claro-30A-A16-10 is Bad frame interpolation.

Multenet PROD0201

2009-11-05T02:38:00.001-08:00

The Ether PAD Duo is a versatile device that can be used in stand-alone, DIN rail or 19" rack-mount applications. It requires an exterior power supply and has a 10/100 Base-T Ethernet interface and two RS232 /RS422/RS485 serial interfaces.

This product range includes the following hardware configurations:
- Manual or auto selectable 10/100 Base-T Ethernet to two software selectable RS232, RS422 or RS485 serial ports.

And the following key-enabled software options are accessible:
Data Logging, Scripting, PPP, Routing, Modbus Scripting, Modbus Bridge

Features
• Apparatus network connectivity via UDP/IP, TCP/IP with SNMP MIB II protocol suite.
• Data logging capacity with attachment mail option.
• Apparatus management via Telnet, Boot/TFTP, Web Browser, SNMP, Built-in Serial configuration interface. Windows and Linux configuration Utility.
• Flash memory for convenient software updates via FTP.
• Low charge and Compact Size.
• Modbus Bridge and Scripting.
• Dynamic Routing and PPP-over-Serial.
• Numerous Network connections allowed to the same Serial data stream.
• DIN Rail mounting and 19" rack mounting kits accessible.

Software Specification:
Network Protocols: TCP/IP, UDP/IP, Boot/DHCP, TFTP, ICMP, ARP, Proxy ARP, Telnet, FTP (client & server), HTTP, SMTP, DNS, PPP, RIP, SNMP (v1), Modbus/TCP, Modbus/UDP, and Redirector (RFC2217)
Serial Protocols: Raw, Redirector, TC500, Modbus/RTU, Modbus/ASCII
Parity: None, Even, Odd
Flow Control: None, Hardware (RTS/CTS), Software (XON, XOFF)
Data Size: 5, 6, 7, 8
Stop bits: 1, 2

Data Throughput: 300 to 115200 Baud per port
• Web Server
• Debug and diagnostic tools
• Password protection
• Firmware upgrading over serial Kermit or network
• Multiple concurrent network connections (50 max)

Hardware Specification:
• ARM7 processor
• 8MB RAM and 4MB Flash
• 10/100 Base-T Ethernet line interface
• RS232/RS422/RS485 Serial interfaces
• RS232 Serial configuration interface
• LED indication for Ethernet and Serial port status and indicators for Ether PAD health

Physical Specifications:
• Ethernet: RJ45 connector (10/100 Base-T)
• Serial port (RS232/RS422/RS485) is DB9 male connector
• Serial Configuration port (RS232) is RJ12 connector
• Enclosure of this card is Aluminum extrusion and end plates
• Dimensions of this card is 127mm x 104mm x 50mm
• Weight is just 400 grams
• PSU Weight is 600 grams
• Temperature Range Operating is 0 degrees Celsius to 60 degrees Celsius
• Temperature Range Storage: minus 20 degrees Celsius to 85 degrees Celsius

Electrical Specifications:
Power requirement of this card is 5W - 10V-30V DC or 10V-20V AC
Connector: IBM kind at rear and terminal type on the front plate for DIN Rail PSU connection
Power supply adapter accessible as an option

Multenet PROD0200

2009-10-22T03:08:00.001-07:00

Multenet Ether PAD Lite Serial-Ethernet Device Server; (1 x RS232/422/485)

Ether PAD Lite is a versatile, entry-level connectivity device that can be used in stand-alone, DIN rail or 19” rack-mount applications. It have need of an external power supply and has a 10/100 Base-T Ethernet interface and a RS232/RS422/RS485 serial interface connecting an asynchronous serial apparatus to an Ethernet network.

Ether PAD Lite features include:

Apparatus network connectivity via UDP/IP, TCP/IP with SNMP MIB II protocol suite.
Apparatus management via Telnet, Boot/TFTP, Web Browser, SNMP, Windows and Linux configuration Utility
Flash memory for convenient software updates.
Low charge and Compact Size.
Modbus Slave Bridge linking Modbus TCP/UDP to Modbus ASCII/RTU.
Numerous Network connections allowed to the same Serial data stream.
DIN Rail mounting and 19” rack mounting kits accessible.

Software Specification

Network Protocols: TCP/IP, UDP/IP, Boot/DHCP, TFTP, ICMP, ARP, Proxy ARP, Telnet, HTTP, SMTP, DNS, SNMP (v1), Modbus/TCP, Modbus/UDP, and Redirector (RFC2217)
Serial Protocols: Raw, Redirector, TC500, Modbus/RTU and Modbus/ASCII
Parity: None, Even, Odd, Mark along with Space
Flow Control: None, Hardware (RTS /CTS), Software (XON and XOFF)
Data Size: 5, 6, 7, 8
Stop bits: 1 and 2
Data Throughput: 300 to 115200 Baud per port
Web Server (configuration)
Password protection
Firmware upgrading over serial Kermit
Numerous concurrent network connections (5 max)

Hardware Specification

ARM7 processor
8MB RAM and 1MB Flash
10/100 Base-T Ethernet line interface
RS232/RS422/RS485 is Serial interface
LED signal for Ethernet & Serial port status, and indicators for health.

Physical Specifications

Connectivity:

Ethernet (10/100 Base-T): RJ45
Serial port (RS232/RS422/RS485): DB9 male
Enclosure: Black anodized aluminum extrusion with aluminum faceplates.
Dimensions of this card is 127mm x 104mm x 50mm
Card’s Weight is just 430g
Temperature Range Operating: 0 degrees Celsius to 60 degrees Celsius
Temperature Range Storage: Minus 20 degrees Celsius to 85 degrees Celsius.

Electrical Specifications

Power requirement: External Power supply is 5W - 10V-30V DC or 10V-20V AC (power supply adapter accessible as an option). Power connector on front for DIN Rail PSU connection.
Standards Compliance:UL, CE

Part Numbers

Ether PAD Lite: PROD0200
Euro Power Adapter (220V)’s no. is PROD0902
US Power Adapter (120V) is PROD0903
DIN Rail Mounting Kit is PROD0206
19” Rack Mounting Kit is PROD0207

Product specifications are subject to alteration without notice

Multenet PROD0110

2009-10-20T03:09:00.000-07:00

Multenet Pocket PAD Java Device Server with embedded Java Virtual Machine

Pocket PAD Java is a low charge serial device server that supports an embedded Java Virtual Machine. This innovation is perfect for the user who wants to run custom Java applications straightforwardly on the device. The Pocket PAD Java has four RS232 Serial ports and one Ethernet port which is 10/100 BaseT auto-sensing.

The light-weight Pocket PAD can be used as a stand-alone desktop or mounted on a DIN-rail.

This product array includes the following hardware configuration:

Four RS232 serial to10/100 BaseT Ethernet

Features include:

Device network connectivity via UDP/IP or else TCP/IP.
Apparatus management via Telnet, DHCP/TFTP, Web Browser, SNMP (MIB II) and Built-in.

Serial configuration interface, Windows configuration Utility.

Flash memory for convenient software updates.
Low charge and Compact Size.
Lightweight.
Numerous Network connections allowed to the same Serial data stream.
DIN Rail mounting kit accessible.
Java Virtual Machine.

Software Specification

Network Protocols: TCP/IP, UDP/IP, Boot/DHCP, TFTP, ICMP, ARP, Telnet, and HTTP, SNMP (v1 & v2)
Serial Protocols is Raw, TC500 (BPS)
Parity: None, Even, Odd, Mark and Space.
Flow Control: Hardware (RTS /CTS), Software (XON /XOFF), None
Data Size: 5, 6, 7, 8
Stop bits: 1 and 2
Data Throughput: 300 to 230400 Baud per port
Web Server (Configuration)
Password protection
Software upgrading over serial Kermit
Multiple simultaneous network connections (25 max)

Hardware Specification

ARM9 processor
32MB RAM, along with 8MB Flash
10/100 Base-T Ethernet line interface
Four RS232 Serial interfaces
LED signal for Ethernet and Serial port position, Power & Heartbeat
Detachable DIN-rail mounting bracket

Physical Specifications

Connectivity:

Ethernet (10/100 Base-T): RJ45
Serial port (RS232) of this card is 4x DB9 male
Enclosure of this card is Poly Carbonate
Dimensions of this card is 120mm x 90mm x 40mm
Weight of this card is only 185g
PSU Weight is 98g (Torpedo PSU)
Temperature Range Operating of this card is 0 degrees Celsius to 60 degrees Celsius
Temperature Range Storage is minus10 degrees Celsius to 70 degrees Celsius

Electrical Specifications

Power requirement: External Power supply: 2W (5V DC)
Consumption is 200mA

(Light-weight Torpedo Power Supply accessible as an option)

Multenet PROD0107

2009-10-17T23:33:00.000-07:00

Multenet Pocket PAD 4 Device Server; (4 x RS232)

PocketPAD is a low charge Serial to Ethernet device server. This light weight apparatus can be used as stand-alone or mounted on a DIN rail. PocketPAD connects asynchronous serial apparatus to Ethernet networks.

PocketPAD is an apparatus that interconnects serial and Ethernet systems. The networked horde could have a server application polling for info from the serial unit, or a controller with an Ethernet port. PocketPAD® can be conﬁgured to be a server (Passive/Slave mode) or a horde (Active/Master mode). An utmost of 5 TCP and 5 UDP network applications can be configured on the PocketPAD. Every one TCP application can handle 5 socket connections (Total of 25 concurrent TCP socket connections at any one time).

PocketPAD Features include:

Device network connectivity by the use of UDP/IP or TCP/IP.
Apparatus management via Telnet, DHCP/TFTP, Web Browser, SNMP (MIB II), Built-in Serial configuration interface, Windows configuration Utility.
Flash memory in favor of convenient software updates.
Low charge and Compact Size.
Lightweight.
Numerous Network connections allowed to the same Serial data stream.
DIN Rail mounting kit accessible.

Software Specification

Network Protocols: TCP/IP, UDP/IP, Boot/DHCP, TFTP, ICMP, ARP, Telnet, and HTTP, SNMP (v1 & v2)

Serial Protocols: Raw and TC500

Parity: None, Even, Odd, Mark and Space

Flow Control: Hardware (RTS/CTS), along with Software (XON, XOFF), None

Data Size: 5, 6, 7, 8

Stop bits: 1, 2

Data Throughput: 300 to 230400 Baud per port

Web Server (Configuration)
Password protection
Software upgrading over serial Kermit
Numerous concurrent network connections (25 max)

Hardware Specification

ARM9 processor
8MB RAM and 4MB Flash
10/100 Base-T Ethernet line interface (Auto detect)
Four RS232 Serial interfaces
LED signal for Ethernet and Serial port position, Power & Heartbeat

Physical Specifications Connectivity:

Ethernet is (10/100 Base-T): RJ45
Serial port is (RS-232/422/485): DB9 male
Enclosure of this card is Polycarbonate
Dimensions of this card is 120mm x 90mm x 40mm
Weight is only 185g
PSU Weight is 98g (Torpedo PSU)
Temperature Range Operating is 0 degrees Celsius to 60 degrees Celsius
Temperature Range Storage is minus10 degrees Celsius to 70 degrees Celsius
Electrical Specifications
Power requirement: External Power supply: 2W (5V DC)
Consumption: 200mA
(Light-weight Torpedo Power Supply available as a choice)

Part Numbers

Pocket PAD 4 (4x RS232): PROD0107
Pocket PAD 4 (3x RS232 +
1x RS232/RS422/RS485): PROD0108
Euro PSU (220V): PROD0900
US PSU (120V): PROD0901
DIN Rail Mounting Kit: PROD0111

Product specifications are subject to amendment without notice.

Multenet PROD0101

2009-10-10T03:52:00.000-07:00

Multenet Pocket PAD 1 Device Server; (1 x RS232/422/485)
PocketPAD is a low charge Serial to Ethernet device server. This light weight apparatus can be used as stand-alone or mounted on a DIN rail. PocketPAD connects asynchronous serial devices to Ethernet networks.

PocketPAD is an apparatus that interconnects serial and Ethernet systems. The networked horde could have a server application polling for info from the serial unit, or a controller with an Ethernet port. Pocket PAD® can be conﬁgured to be a server (Passive/Slave mode) or a host (Active/Master mode). An utmost of 5 TCP and 5 UDP network applications can be configured on the PocketPAD. Each TCP application can handle 5 socket connections (Total of 25 simultaneous TCP socket connections at any one time).

Multenet PROD0101 PocketPAD Features include:
One RS232/RS422/RS485 serial to10/100 Base-T Ethernet
Device network connectivity via UDP/IP or else TCP/IP.
Apparatus managing by the use of Telnet, DHCP/TFTP, Web Browser, SNMP (MIB II), and Built-in Serial arrangement interface along with Windows configuration Utility.
Flash memory for suitable software updates.
Low charge and Compact Size.
Lightweight.
Numerous Network connections allowed to the same Serial data stream.
DIN Rail mounting kit accessible.

Software Specification
Network Protocols: TCP/IP, UDP/IP, Boot/DHCP, TFTP, ICMP, ARP, Telnet, and HTTP, SNMP (v1 & v2)
Serial Protocols: Raw TC500 (BPS)
Parity: None, Even, Odd, Mark and Space
Flow Control: Hardware (RTS/CTS) along with Software (XON, XOFF), None
Data Size: 5, 6, 7, 8
Stop bits: 1, 2

Data Throughput: 300 -230400 Baud
1. Web Server (Configuration)
2. Password security
3. Software upgrading over serial Kermit
4. Multiple simultaneous network connections (25 max)

Hardware Specification
1. ARM9 processor
2. 8MB RAM, and 4MB Flash
3. 10/100 Base-T Ethernet line interface (Auto detect)
4. One RS232 Serial interface
5. RS422/RS485 Serial interface facilitate by internal DIP switches.
6. LED signal for Ethernet and Serial port status, Power & Heartbeat

7. Detachable DIN-rail mounting bracket

Multenet PROD0100

2009-10-06T07:11:00.001-07:00

Multenet Pocket PAD 1 Device Server; (1 x RS232)
Pocket PAD is a small charge Serial to Ethernet device server. This low weight device can be used as stand-alone or build up on a DIN rail. Pocket PAD attaches asynchronous serial devices to Ethernet networks.

PocketPAD is a device that interrelates serial and Ethernet systems. The system host could have a server application polling for information from the serial unit, or a controller among an Ethernet port. PocketPAD® can be conﬁgured to be a server (Passive/Slave mode) or a host (Active/Master mode). An utmost of 5 TCP and 5 UDP network applications can be configured on the PocketPAD. Each TCP application can handle 5 socket acquaintances (Total of 25 parallel TCP socket connections at any one time).

Features
Device system connectivity via UDP/IP, TCP/IP.
Multenet PROD0100 offers device managing via Telnet, DHCP/TFTP, Web Browser, SNMP (MIB II), Built-in Serial arrangement interface, Windows configuration Utility.
Flash memory for suitable software updates.
Low charges and compact size.
Lightweight.
Several Network connections allowed to the same Serial data stream.
DIN Rail mounting kit accessible.

Specifications

Software Specification:
Network Protocols: TCP/IP, UDP/IP, Boot/DHCP, TFTP, ICMP, ARP, Telnet, and HTTP, SNMP (v1 & v2)
Multenet PROD0100’s specifications are Serial Protocols: Raw, TC500 (Burroughs Poll Select)
Parity: None, Even, Odd, Mark, Space
Its major specifications are Flow Control: Hardware (RTS/CTS), Software (XON, XOFF), none
Data Size: 5, 6, 7, 8
Stop bits: 1and 2
Multenet PROD0100’s specifications are Data Throughput: Up to 230400 Baud
Web Server (Configuration)
Its main specifications are Debug and diagnostic tools
Password protection
Firmware improve over serial Kermit
Multiple simultaneous network connections (25 max)

Hardware Specification:
ARM9 processor
8MB RAM and 4MB Flash
10/100 Base-T auto identify Ethernet interface
One RS232 Serial interface
Hardware selectable RS422/RS485 Serial interface on Pocket PAD 1 RS-232/422/485
LED indication for Ethernet, Serial & system status

Physical Specifications:
Ethernet (10/100 Base-T): RJ45 connector
Serial port: DB9 male connector
Enclosure: Opaque Green Polycarbonate
Dimensions of this card is 120mm x 90mm x 40mm
Weight is just 151 grams, 160 grams (RS-232/422/485 version)
PSU Weight is 150 grams
Temperature assortment operating: 0 degrees Celsius to 60 degrees Celsius
Temperature assortment Storage: minus10 degrees Celsius to 70 degrees Celsius

Electrical Specification:
Power requirement: 2W (5V DC)
Consumption: 250mA
A light weight switch mode desktop power supply is accessible. Compatible connector options are obtainable.

Addons
detachable DIN-rail Mounting KitMount your PocketPAD on a DIN Rail.

Pika Digital Gateway 4Span

2009-09-29T20:49:00.000-07:00

Pika Asterisk Digital E1/PRI Gateway Card with Echo Cancellation (PCI); Quad Span
Pika Asterisk E1/PRI Gateway cards with echo cancellation characteristic market leading supple port compactness. Up to 4 T1/E1 network interfaces can be facilitates with in field license upgrades.

All Pika E1/PRI Gateway cards ships with hardware ability for up to 4 spans. At early order, 1, 2, 3, or 4 E1/PRI spans are permit. Though, should your Asterisk system raise over time, you can enlarge the port ability by fitting a cost effective span improve license (shipped to you by email). How easy can it obtain!

Main Features
Offers inexpensive Primary Rate ISDN (NA and Euro) network contact for Asterisk environments
All on Host (AoH) echo annulment gives DSP excellence, software based Echo cancellation utilizing a better, low dispensation power algorithm. Because it is completed on the host, luxurious echo cancelling hardware is not necessary
All on Host (AoH) technology takes away luxurious DSP resources to give an reasonable board solution
A single board holds up gainful growth for up to 120 channels
Supplementary T1/E1 spans can be added with software licensing eradicating the require for extra PCI slots
Support for future requests such as fax can be completed with straightforward software upgrades
This card is as easy as downloading and installing the channel driver for Asterisk and connecting the boards!Inhabitant switching between voice channels (B channels) on the similar card or crossways several cards offer a lower latency connection enhancing voice conversation quality

Pika Digital Gateway 3Span

2009-09-28T03:57:00.000-07:00

Pika Asterisk Digital E1/PRI Gateway Card with Echo Cancellation (PCI); Triple Span
Pika Asterisk E1/PRI Gateway cards with echo cancellation characteristic market leading supple port compactness. Up to 4 T1/E1 network interfaces can be facilitates with in field license upgrades.

All Pika E1/PRI Gateway cards ships with hardware ability for up to 4 spans. At early order, 1, 2, 3, or 4 E1/PRI spans are permit. Though, should your Asterisk system raise over time, you can enlarge the port ability by fitting a cost effective span improve license (shipped to you by email). How easy can it obtain!

Main Features
• Offers inexpensive Primary Rate ISDN (NA and Euro) network contact for Asterisk environments
• All on Host (AoH) echo annulment gives DSP excellence, software based Echo cancellation utilizing a better, low dispensation power algorithm. Because it is completed on the host, luxurious echo cancelling hardware is not necessary
• All on Host (AoH) technology takes away luxurious DSP resources to give an reasonable board solution
• A single board holds up gainful growth for up to 120 channels
• Supplementary T1/E1 spans can be added with software licensing eradicating the require for extra PCI slots
• Support for future requests such as fax can be completed with straightforward software upgrades
• This card is as easy as downloading and installing the channel driver for Asterisk and connecting the boards!
• Inhabitant switching between voice channels (B channels) on the similar card or crossways several cards offer a lower latency connection enhancing voice conversation quality

Pika Digital Gateway 2Span

2009-09-24T02:00:00.000-07:00

Pika Asterisk Digital E1/PRI Gateway Card with Echo Cancellation (PCI); Single Span
Pika Asterisk E1/PRI Gateway cards with echo cancellation characteristic market leading supple port compactness. Up to 4 T1/E1 network interfaces can be facilitates with in field license upgrades.

All Pika E1/PRI Gateway cards ships with hardware ability for up to 4 spans. At early order, 1, 2, 3, or 4 E1/PRI spans are permit. Though, should your Asterisk system raise over time, you can enlarge the port ability by fitting a cost effective span improve license (shipped to you by email). How easy can it obtain!

Main Features
Offers inexpensive Primary Rate ISDN (NA and Euro) network contact for Asterisk environments
All on Host (AoH) echo annulment gives DSP excellence, software based Echo cancellation utilizing a better, low dispensation power algorithm. Because it is completed on the host, luxurious echo cancelling hardware is not necessary
All on Host (AoH) technology takes away luxurious DSP resources to give an reasonable board solution
A single board holds up gainful growth for up to 120 channels
Supplementary T1/E1 spans can be added with software licensing eradicating the require for extra PCI slots
Support for future requests such as fax can be completed with straightforward software upgrades
This card is as easy as downloading and installing the channel driver for Asterisk and connecting the boards!Inhabitant switching between voice channels (B channels) on the similar card or crossways several cards offer a lower latency connection enhancing voice conversation quality

Pika Digital Gateway 1Span

2009-09-23T00:06:00.001-07:00

RockForce Quatro

2009-09-22T04:06:00.000-07:00

The RockForce™ QUATRO+ gives four sovereign analog ports. Serious applications comprising V.92 data, V.44 compression, V.34 Super G3 fax, voice, as well as speech can be hold up concurrently on any amalgamation of ports. Entirely scalable planning gives each port with its own devoted Controller (CPU) and Digital Signal Processor (DSP). This guarantees enough processing influence despite of how demanding the request may be. With hold up for the very newest industry standards, the RockForce™ cards are well-matched with several PCI or PCI-X systems, comprising those utilizing Universal PCI (3Volt & 5Volt) signaling. Industry leading ‘short board’ appearance issue allows the RockForce™ cards to fit into all systems, from the very negligible cube, to the very biggest rack.

Any number or amalgamation of RockForce™ cards perhaps worked concurrently in your system. Unreceptive cooling formulates fans pointless. Native working system hold up does not need any extra drivers. This makes certain well-matched with the very first and very latest PC operating systems and minimizes the holdup invited waiting for driver releases. Standard’s based fitting and programming interfaces facilitates RockForce™ cards to incorporate rapidly and flawlessly with all well-liked systems and application software.

Telecommunication industry customary dependability forecast methodologies approximation a Mean Time between Failure (MTBF) of 96 Years for the RockForce™ QUATRO+. The RockForce™ SideBand API gives sole, improved card management characteristics in addition to the standard system and submission interfaces, comprising the aptitude to interpret the card’s electronic serial number, reset entity ports and exhibit port correct traces in real-time. Mainpine provides entire peace of mind to its clientele, providing a Three Year Warranty on every one its products. On top of this, if you’re not totally contented with your RockForce™ product within 30 days, we will provide you a complete refund.

Key Benefits
In the Extreme Flexibility of this card is the any mixture of data, fax, voice or speech applications.
Ultra High Performance Onboard Processing of this card is devoted 116 MHz CPU and DSP per port.
Best-In-Class Hardware Design of the RockForce Duo is examined for fulfillment with PCI 3.0 specifications.
Full Scalability of the RockForce Duo is unlimited number of cards can be functioned concomitantly.
Native Operating System Support of the RockForce Duo is Microsoft Windows, Linux as well as most UNIX variants.
Ultra Quick and Simple Installation of this card is Fully Plug and Play well-matched, no physical configuration necessary.Superior Reliability of the RockForce Duo is Mean Time Between Failure (MTBF) of 49 years.

RockForce Octo

2009-09-20T03:52:00.000-07:00

The RockForce™ OCTO+ gives eight sovereign analog ports. Serious applications comprising V.92 data, V.44 compression, V.34 Super G3 fax, voice, as well as speech can be hold up concurrently on any amalgamation of ports. Entirely scalable planning gives each port with its own devoted Controller (CPU) and Digital Signal Processor (DSP). This guarantees enough processing influence despite of how demanding the request may be. With hold up for the very newest industry standards, the RockForce™ cards are well-matched with several PCI or PCI-X systems, comprising those utilizing Universal PCI (3Volt & 5Volt) signaling. Industry leading ‘short board’ appearance issue allows the RockForce™ cards to fit into all systems, from the very negligible cube, to the very biggest rack.

Any number or amalgamation of RockForce™ cards perhaps worked concurrently in your system. Unreceptive cooling formulates fans pointless. Native working system hold up does not need any extra drivers. This makes certain well-matched with the very first and very latest PC operating systems and minimizes the holdup invited waiting for driver releases. Standard’s based fitting and programming interfaces facilitates RockForce™ cards to incorporate rapidly and flawlessly with all well-liked systems and application software.

Telecommunication industry customary dependability forecast methodologies approximation a Mean Time between Failure (MTBF) of 96 Years for the RockForce™ OCTO+. The RockForce™ SideBand API gives sole, improved card management characteristics in addition to the standard system and submission interfaces, comprising the aptitude to interpret the card’s electronic serial number, reset entity ports and exhibit port correct traces in real-time. Mainpine provides entire peace of mind to its clientele, providing a Three Year Warranty on every one its products. On top of this, if you’re not totally contented with your RockForce™ product within 30 days, we will provide you a complete refund.

Key Benefits
In the Extreme Flexibility of this card is the any mixture of data, fax, voice or speech applications.
Ultra High Performance Onboard Processing of this card is devoted 116 MHz CPU and DSP per port.
Best-In-Class Hardware Design of the RockForce Duo is examined for fulfillment with PCI 3.0 specifications.
Full Scalability of the RockForce Duo is unlimited number of cards can be functioned concomitantly.
Native Operating System Support of the RockForce Duo is Microsoft Windows, Linux as well as most UNIX variants.
Ultra Quick and Simple Installation of this card is Fully Plug and Play well-matched, no physical configuration necessary.Superior Reliability of the RockForce Duo is Mean Time Between Failure (MTBF) of 49 years.

RockForce IQ Express 1SP

2009-09-19T00:30:00.000-07:00

Mainpine RockForce IQ Express FAX Card (PCIe); 1-Port (Standard-Profile)
RockForce IQ Express Intelligent PCI-Express FAX Cards are the latest count to Mainpine's smart FAX card lineup. RockForce IQ Express FAX cards give clientele with the speed, dependability and performance of enterprise-class FAX hardware at an outstanding price-to-performance guarantee.

FAX Specifications
In the fax specification of the RockForce IQ Express ISP has the different V like ITU-T V.34 (Super G3), V.17, V.29, V.27 ter, V.21 ch. 2, and V.8 Call concern
This card also has on ITU-T T.30, T.31 (Service Class 1, 1.0, 2.0, 2.1)
ECM Error Correction Mode is also provided by this high quality card.
MH, MR, MMR, JBIG as well as JPEG Compression are the main parts or specifications of this card.
Standard, very well, superfine, hyperfine and ultra fine resolutionIt also has the high quality Color FAX support

RockForce Duo

2009-09-17T22:59:00.000-07:00

Mainpine RockForce Duo+ FAX Card (PCI); 2 ports
The RockForce™ DUO+ gives two sovereign analog ports. Serious applications comprising V.92 data, V.44 compression, V.34 Super G3 fax, voice, as well as speech can be hold up concurrently on any amalgamation of ports. Entirely scalable planning gives each port with its own devoted Controller (CPU) and Digital Signal Processor (DSP). This guarantees enough processing influence despite of how demanding the request may be. With hold up for the very newest industry standards, the RockForce™ cards are well-matched with several PCI or PCI-X systems, comprising those utilizing Universal PCI (3Volt & 5Volt) signaling. Industry leading ‘short board’ appearance issue allows the RockForce™ cards to fit into all systems, from the very negligible cube, to the very biggest rack.

Any number or amalgamation of RockForce™ cards perhaps worked concurrently in your system. Unreceptive cooling formulates fans pointless. Native working system hold up does not need any extra drivers. This makes certain well-matched with the very first and very latest PC operating systems and minimizes the holdup invited waiting for driver releases. Standard’s based fitting and programming interfaces facilitates RockForce™ cards to incorporate rapidly and flawlessly with all well-liked systems and application software.

Telecommunication industry customary dependability forecast methodologies approximation a Mean Time Between Failure (MTBF) of 96 Years for the RockForce™ DUO+. The RockForce™ SideBand API gives sole, improved card management characteristics in addition to the standard system and submission interfaces, comprising the aptitude to interpret the card’s electronic serial number, reset entity ports and exhibit port correct traces in real-time. Mainpine provides entire peace of mind to its clientele, providing a Three Year Warranty on every one its products. On top of this, if you’re not totally contented with your RockForce™ product within 30 days, we will provide you a complete refund.

Key Benefits
In the Extreme Flexibility of this card is the any mixture of data, fax, voice or speech applications.
Ultra High Performance Onboard Processing of this card is devoted 116 MHz CPU and DSP per port.
Best-In-Class Hardware Design of the RockForce Duo is examined for fulfillment with PCI 3.0 specifications.
Full Scalability of the RockForce Duo is unlimited number of cards can be functioned concomitantly.
Native Operating System Support of the RockForce Duo is Microsoft Windows, Linux as well as most UNIX variants.
Ultra Quick and Simple Installation of this card is Fully Plug and Play well-matched, no physical configuration necessary.Superior Reliability of the RockForce Duo is Mean Time Between Failure (MTBF) of 49 years.

Sangoma S5142P

2009-09-17T06:03:00.000-07:00

Sangoma S5142P Sync sequential PCI WAN Card; 6 ports

Scientific stipulations
2 x most important sequential V.35/X.21/RS232 port to 8Mbps.
2 x inferior series V.35/X.21/RS232 port to 512kbps.
All four ports sustained by one DB78 connector
Card takes simply 1 PCI slit to support 4 ports.
Supremacy: 550mA at +5v, 60Ma at +-12v.
MTBF operation contains: > 1 Million hours (considered).
PCI 32 bit (5v and 64 bit (3.3v) companionable.
Temperature array: 0 – 45C.
All set-up and relationship is in software or by contraption BIOS.
Magnitude: 147mm x 99 mm.

Features extra to support Data scope applications
All modem organize lines are monitored.
Detection of the attendance or nonattendance of TX and RX clock signals, and dimension of the clock rates.
Either monitoring only or reproduction (transmit and obtain).
Monitoring or imitation of ATM or HDLC at line speeds above 2Mbps, BSC at procession speeds to 128kbps, Synch to 256kbps, and raw unformatted bit watercourse to 2Mbps.
Time stamps with a declaration of 100 microseconds or enhanced to allow exact sequencing of procedures. Each temperament can be individually time embossed.

Sequential interfaces
RS223, V.5, X.21, RS421 EIA530 supported on Primary and Secondary ports.
Clocking: Internally generated or exterior at procession speeds to 6Mbps.
NRZS, NRZ, FM, FM1, Manchester encoding.
Mutually ports are RS486 competent, sustaining multipoint lines.

Line protocols
ATM, Frame communicates K.25, HDLS, PPP, SS7, BSC Point-to-Point, BSC 3270, SDL, translucent bit-stream.
Advanced level procedure
IP/IPX in excess of Frame transmit/ PPP/ HDL/ K.25, K.25 over Frame convey (Annex G), BSC in excess of X.25 (DMT and TCOP), SNA over K.25, PPPE, PPPA, IP over ATM.

Warranty
Three years parts and labour.
Certification
FCC ingredient 15 Class A, CE.
Indicative Tools
WANPIPEMON, SNMP, organization logs.
Production features

ISO 9002

Sangoma S5142

2009-09-15T20:43:00.000-07:00

Sangoma S5142 Sync sequential PCI WAN Card; 2 ports

Scientific stipulations
Most important sequential V.35/X.21/RS232 port to 4Mbps.
Substandard series V.35/X.21/RS232 port to 512kbps.
All four ports sustained by one DB78 connector
Card takes simply 1 PCI slit to support 4 ports.
Supremacy: 550mA at +5v, 60Ma at +-12v.
MTBF operation contains: > 1 Million hours (considered).
PCI 32 bit (5v and 64 bit (3.3v) companionable.
Temperature array: 0 – 45C.
All set-up and relationship is in software or by contraption BIOS.
Magnitude: 147mm x 99 mm.

Features extra to support Data scope applications
All modem organize lines are monitored.
Detection of the attendance or nonattendance of TX and RX clock signals, and dimension of the clock rates.
Either monitoring only or reproduction (transmit and obtain).
Monitoring or imitation of ATM or HDLC at line speeds above 2Mbps, BSC at procession speeds to 128kbps, Synch to 256kbps, and raw unformatted bit watercourse to 2Mbps.
Time stamps with a declaration of 100 microseconds or enhanced to allow exact sequencing of procedures. Each temperament can be individually time imprinted.

Sequential interfaces
RS223, V.5, X.21, RS421 EIA530 supported on Primary and Secondary ports.
Clocking: Internally generated or exterior at procession speeds to 6Mbps.
NRZS, NRZ, FM, FM1, Manchester encoding.
Mutually ports are RS486 competent, sustaining multipoint lines.

Line protocols
ATM, Frame communicates K.25, HDLS, PPP, SS7, BSC Point-to-Point, BSC 3270, SDL, translucent bit-stream.
Advanced level procedure
IP/IPX in excess of Frame transmit/ PPP/ HDL/ K.25, K.25 over Frame convey (Annex G), BSC in excess of X.25 (DMT and TCOP), SNA over K.25, PPPE, PPPA, IP over ATM.
Warranty
Three years and six month parts and labour.
Certification
FCC ingredient 15 Class A, FCC Part 68, CE.
Analytical Tools
WANPIPEMON, SNMP, structure logs.
Production features

ISO series 9002

Sangoma S518V

2009-09-15T05:16:00.000-07:00

Sangoma S518V ADSL PCI WAN Card
General functions ADSL PCI WAN card sustaining all requests including WANPIPE® steering Support. Sustain PPPE (PPP over Ethernet), PPPA (PPP in excess of ATM), Ethernet in excess of ATM, IP over ATM. ADSL Standards: ITU G.993.1 (G.DMT), ITU G.994.2 (G.Lite), ITU G.993 appropriate A/Annex C

Linux / FreeBSD / Windows Driver sustain

Technological requirement
Designed and built to server average of presentation and dependability.
PCI 2.4 bus interface, 64 bit (3.3v) and 32 bit (5v) acquiescent.
Self-configuring and procession optimizing.
Power: 530Ma at 5v.
MTBF continuously operate: > 100,000 hours.
Temperature assortment: 0 to 47C.
All set-up and relationship is in software or by mechanism BIOS.
Magnitude: 145mm x 90 mm.
Will attach appropriately to any existing Central workplace DSLAM on a POTS line provide at least the identical presentation as the Telco recommended hardware.

Line protocol
PPP over ATMPPP in excess of Ethernet, Ethernet above ATM, and IP over ATM.
Warranty
Three years ingredient and labor.
Certification
FCC fraction 15 Class A, FCC Part 66, CE.
Investigative Tools
WANPIPEMON, SNMP, organization logs.
Production feature
ISO 9004

Operating systems
Windows® XP, Windows® 2000, Windows® 9x, Windows® ME, Linux (all versions, discharge and distributions beginning 1.0 up),ADSL standard ITU G.993.1 (G.DMT) ITU G.994.2 (G.Lite) ITU G.992 Annex A, Annex C ANSI T1.414 Issue 2.

Sangoma A200C REMORA-08V

2009-09-14T06:27:00.000-07:00

Sangoma A200C Asterisk Card (PCI); 4 or 6 FXS/FXO port capabilities.
Sangoma A200C/REMORA Analog Card offers most favorable support of analog voice traffic. It delivers advanced audio superiority and is flexible to 24 FXO/FXS ports in a 2U form features.

As you necessitate them, additional REMORA™ Cards can be additional to the base 4 port A200C/REMORA certificates. A solitary PCI slit host relationship can sustain up to 22 FXO/FXS ports with widespread synchronous clocking for all straits.

Features and remuneration

8 or 10 ports hold up, integration FXO and FXS interfaces as essential.
Particular synchronous PCI crossing point up to 34 FXO/FXS ports.
Auto-intellect compatibility with 7v and 3.5v PCI busses.
Product ships as typical with 120mm and 80mm PCI obverse Panels and Cable/s Hold up for the Asterisk™ Gratis Switch™ PBX/IVR assignments, as well as other Open foundation and proprietary PBX/Switch/IVR/VIP gateway submissions.

Sangoma A200C REMORA-04C

2009-09-13T01:00:00.001-07:00

Sangoma A200C Asterisk license (PCI); 4 or 2 FXS/FXO port capabilities introducing the industry's earliest reasonably priced single harbor T1/E1/J1 card with obtainable Telco grade hardware echo annulment. The A101 is component of Sangoma's family unit of superior bendable. Telecommunications hardware invention line—it exploit the same high-performance PCI or PCI communicate interface that is providing advanced presentation in significant systems all in excess of the world for humankind. The A101 supports up to 2.046Mbps of full duplex information throughput or up to 31 voice calls over a solitary T1, E1, or J1 procession.

Through Sangoma certificates, you can forever take benefit of hardware and software enhancements, as soon as they turn out to be accessible. The A101BK, resembling the entire cards in Sangoma’s AFT family, is field promote able with crash-confirmation firmware. Prefer the Sangoma A101B and A101BK cards with Octasic's DSP hardware and certified algorithms to achieve carrier-status echo termination and Voice superiority improvement functions on your open source or even proprietary telephone structure.

Technical Specifications
One T1/E1 harbor with most excellent PCI communicates or PCI interface for high performance voice and statistics applications.
Line decoding: HDC3, AMI, and B8ZS.
Framing: CRC4-, Non CRC4, SF, Ds4. Also companionable with Japan’s J1.
Hold up for Asterisk TM, Yates TM, and gratis Switch TM PBK/IVR assignments, as well as additional open foundation and proprietary PBK/Switch/IVR/VIP opportunity relevancies.
All of Sangoma’s AFT inventions use the identical base PCI interface card and the similar efficiently engineered firmware on the same relations of Field improvable entrance Arrays.
Completely compatible by means of all commercially obtainable motherboards—suitable PCI-standard break off distribution without manual enhancement.
A101-K and A101D-K PCI articulate: 1 Path PCI converse to the bus technology.
Magnitudes: 2U Form feature: 125 mm x 55 mm for use in constrained framework.
Includes excellence quality, experienced RJ45 cable and short 2U increasing clips for installation in 2U stand accumulate servers.
Supremacy: 800 mA climax quality, ready 320 mA be very successful at +3.3 V or 7 V.
High temperature range: 0–53 °C.
Auto intellect compatibility through 5 V and 3.3 V PCI busses.
Intellectual hardware: Downloadable FPGA indoctrination with various operating methods. Insert new features connected to voice and/or figures of the hardware when they are converted into accessible.
32-bit bus master DMA data interactions crossways PCI interface at 132 Mbytes/sec for smallest amount congregation processor interference.
Circle buffer DMA treatment for smallest amount of host intercession and guaranteed information honesty on high capacity systems.
Maintain the Robbed Bit Channel coupled indications (CAS) and ISDN PRI.
There is T1/E1 and incomplete T1/E1, several channel HDLC for each line for assorted data/TDM voice applications.
Optimized for each channel DMA watercourse and hardware-level HDLC managing deliver the host CPU.
Use unprocessed bit stream crossing point to hold up arbitrary non-standard line procedures, such as non-byte aligned monosynch or implore.
WANPIPE® routing stack is entirely autonomous of TDM voice submissions for whole system dependability. WANPIPE® supports proficient, field-experienced, and dependable structure communicates, PPP, HDLC, and K.25.

Sangoma A104-K

2009-09-12T03:33:00.001-07:00

Sangoma A104-K Asterisk E1/PRI Voice/records license (PCIe) with Echo postponement; 4 ports.
The product of A104 is the double port edition of Sangoma’s family of superior, Elastic Telecommunications (AFT) hardware considered for optimum hold up of voice and information over T1, E1 and J1.

Accessible in both PCI (A104) and PCI communicate (A104-K) form issues, The A104 offers up to 16.6Mbps of full duplex data throughput or 130 voice calls over four T1 and or E1 positions to support elevated performance PCI-based steering and telephony structures. Superior clocking characteristics allow E1 and T1 lines to be varied with occupied organization. As ingredient of Sangoma’s AFT series of products, the A104 formulates use of the identical elevated performance PCI crossing point that has been deployed in huge quantities all in excess of the world for humankind. The obtainable A104b and A104b-K cards comprise Classic's DSP hardware and proficient algorithms providing carrier-evaluation echo annulment and Voice excellence quality Enhancement (VQE) purposes. Approximating all the Sangoma AFT family, the A104 is meadow upgradeable to take benefits of hardware and software enhancement as they become obtainable.

Features
Four T1/E1 ports with a single PCI interface for high performance voice and data applications.
For this product TDM clocking method: Network timing can be approved from a network -connected DS0 to any or all of the other seaports. Equally T1 and E1 are supported concurrently, making it probable to mix T1 channel banks and E1 networks with occupied channel harmonization.
Line decoding: In this series AMI and B8ZS. Framing: CRC4, non-CRC4, EF, D4T1/E1.
Hold up for the Asterisk™ Gratis Switch™ PBX/IVR assignments, as well as other Open foundation and proprietary PBX/Switch/IVR/VIP gateway submissions.
All of Sangoma’s AFT inventions use the identical base PCI interface card and the similar efficiently engineered firmware on the same relations of Field improvable entrance Arrays.
A104, A104d PCI: Completely compatible by means of all commercially obtainable motherboards—suitable PCI-standard break off distribution without manual enhancement.
A104-k, A104d-k PCI articulate: 1 Path PCI converse to the bus technology
Magnitudes: 2U Form feature: 125 mm x 55 mm for use in constrained framework.
Includes excellence quality, experienced RJ45 cable and short 2U increasing clips for installation in 2U stand accumulate servers.
High superiority experienced RJ45 cables incorporated.
Supremacy: 800 mA climax quality, ready 320 mA be very successful at +3.3 V or 7 V.
High temperature range: 0–53 °C.
Auto intellect compatibility through 5 V and 3.3 V PCI busses.
Intellectual hardware: Downloadable FPGA indoctrination with various operating methods. Insert new features connected to voice and/or figures of the hardware when they are converted into accessible.
32-bit bus master DMA data interactions crossways PCI interface at 132 Mbytes/sec for smallest amount congregation processor interference.
Circle buffer DMA treatment for smallest amount of host intercession and guaranteed information honesty on high capacity systems.
Maintain the Robbed Bit Channel coupled indications (CAS) and ISDN PRI.
There is T1/E1 and incomplete T1/E1, several channel HDLC for each line for assorted data/TDM voice applications.
Optimized for each channel DMA watercourse and hardware-level HDLC managing deliver the host CPU.
EDAC™ (copyright pending) technology will be incorporated to radically reduce the expenditure of echo annulment.
Pasture improvable hardware allows for innovative TDM-related occupations to be additional as they become obtainable.
Use unprocessed bit stream crossing point to hold up arbitrary non-standard line procedures, such as non-byte aligned monosynch or implore.
WANPIPE® routing stack is entirely autonomous of TDM voice submissions for whole system dependability. WANPIPE® supports proficient, field-experienced, and dependable structure communicates, PPP, HDLC, and K.25.

Sangoma A104b-K

2009-09-09T03:15:00.000-07:00

Sangoma A104b-K Asterisk E1/PRI Voice/records license (PCIe) with Echo postponement; 4 ports.
The product of A104 is the double port edition of Sangoma’s family of superior, Elastic Telecommunications (AFT) hardware considered for optimum hold up of voice and information over T1, E1 and J1.

Accessible in both PCI (A104) and PCI communicate (A104-K) form issues, The A104 offers up to 16.6Mbps of full duplex data throughput or 130 voice calls over four T1 and or E1 positions to support elevated performance PCI-based steering and telephony structures. Superior clocking characteristics allow E1 and T1 lines to be varied with occupied organization. As ingredient of Sangoma’s AFT series of products, the A104 formulates use of the identical elevated performance PCI crossing point that has been deployed in huge quantities all in excess of the world for humankind. The obtainable A104b and A104b-K cards comprise Classic's DSP hardware and proficient algorithms providing carrier-evaluation echo annulment and Voice excellence quality Enhancement (VQE) purposes. Approximating all the Sangoma AFT family, the A104 is meadow upgradeable to take benefits of hardware and software enhancement as they become obtainable.

Features

Four T1/E1 ports with a single PCI interface for high performance voice and data applications.
For this product TDM clocking method: Network timing can be approved from a network -connected DS0 to any or all of the other seaports. Equally T1 and E1 are supported concurrently, making it probable to mix T1 channel banks and E1 networks with occupied channel harmonization.
Line decoding: In this series AMI and B8ZS. Framing: CRC4, non-CRC4, EF, D4T1/E1.
Hold up for the Asterisk™ Gratis Switch™ PBX/IVR assignments, as well as other Open foundation and proprietary PBX/Switch/IVR/VIP gateway submissions.
All of Sangoma’s AFT inventions use the identical base PCI interface card and the similar efficiently engineered firmware on the same relations of Field improvable entrance Arrays.
A104, A104d PCI: Completely compatible by means of all commercially obtainable motherboards—suitable PCI-standard break off distribution without manual enhancement.
A104-k, A104d-k PCI articulate: 1 Path PCI converse to the bus technology
Magnitudes: 2U Form feature: 125 mm x 55 mm for use in constrained framework.
Includes excellence quality, experienced RJ45 cable and short 2U increasing clips for installation in 2U stand accumulate servers.
High superiority experienced RJ45 cables incorporated.
Supremacy: 800 mA climax quality, ready 320 mA be very successful at +3.3 V or 7 V.
High temperature range: 0–53 °C.
Auto intellect compatibility through 5 V and 3.3 V PCI busses.
Intellectual hardware: Downloadable FPGA indoctrination with various operating methods. Insert new features connected to voice and/or figures of the hardware when they are converted into accessible.
32-bit bus master DMA data interactions crossways PCI interface at 132 Mbytes/sec for smallest amount congregation processor interference.
Circle buffer DMA treatment for smallest amount of host intercession and guaranteed information honesty on high capacity systems.
Maintain the Robbed Bit Channel coupled indications (CAS) and ISDN PRI.
There is T1/E1 and incomplete T1/E1, several channel HDLC for each line for assorted data/TDM voice applications.
Optimized for each channel DMA watercourse and hardware-level HDLC managing deliver the host CPU.
EDAC™ (copyright pending) technology will be incorporated to radically reduce the expenditure of echo annulment.
Pasture improvable hardware allows for innovative TDM-related occupations to be additional as they become obtainable.
Use unprocessed bit stream crossing point to hold up arbitrary non-standard line procedures, such as non-byte aligned monosynch or implore.
WANPIPE® routing stack is entirely autonomous of TDM voice submissions for whole system dependability. WANPIPE® supports proficient, field-experienced, and dependable structure communicates, PPP, HDLC, and K.25.

Sangoma A102-K

2009-09-08T02:22:00.000-07:00

The A102K is component of Sangoma's family unit of superior bendable

Telecommunications hardware invention line—it exploit the same high-performance PCI or PCI communicate interface that is providing advanced presentation in significant systems all in excess of the world for humankind.

The A102K supports up to 60Mbps of full duplex information throughput or up to 31 voice calls over a solitary T1, E1, or J1 procession.

Get benefits of hardware and software upgrading, as soon as they turn out to be obtainable.

Resembling all licenses in Sangoma’s AFT family, the A101BX, resembling the entire cards in Sangoma’s AFT family, is field promote able with crash-confirmation firmware.

Prefer the Sangoma A102B and A102Kcards with Octasic's DSP hardware and certified algorithms to achieve carrier-status echo termination and Voice superiority improvement functions on your open source or even proprietary telephone structure

Technical specifications

One T1/E1 harbor with most excellent PCI communicates or PCI interface for high performance voice and statistics applications.
Line decoding: HDC3, AMI, and B8ZS.
Framing: CRC5-, Non CRC5, SF, D5. Also companionable with Japan’s J1.
Hold up for Asterisk TM, Yates TM, and gratis Switch TM PBK/IVR assignments, as well as additional open foundation and proprietary PBK/Switch/IVR/VIP opportunity relevancies.
All of Sangoma’s AFT inventions use the identical base PCI interface card and the similar efficiently engineered firmware on the same relations of Field improvable entrance Arrays.
Completely compatible by means of all commercially obtainable motherboards—suitable PCI-standard break off distribution without manual enhancement.
A101-K and A102-K PCI articulate: 1 Path PCI converse to the bus technology.
Magnitudes: 2U Form feature: 125 mm x 55 mm for use in constrained framework.
Includes excellence quality, experienced RJ45 cable and short 2U increasing clips for installation in 2U stand accumulate servers.
Supremacy: 800 mA climax quality, ready 320 mA be very successful at +3.3 V or 7 V.
High temperature range: 0–53 °C.
Auto intellect compatibility through 5 V and 3.3 V PCI busses.
Intellectual hardware: Downloadable FPGA indoctrination with various operating methods. Insert new features connected to voice and/or figures of the hardware when they are converted into accessible.
32-bit bus master DMA data interactions crossways PCI interface at 132 Mbytes/sec for smallest amount congregation processor interference.
Circle buffer DMA treatment for smallest amount of host intercession and guaranteed information honesty on high capacity systems.
Maintain the Robbed Bit Channel coupled indications (CAS) and ISDN PRI.
There is T1/E1 and incomplete T1/E1, several channel HDLC for each line for assorted data/TDM voice applications.
Optimized for each channel DMA watercourse and hardware-level HDLC managing deliver the host CPU.
Use unprocessed bit stream crossing point to hold up arbitrary non-standard line procedures, such as non-byte aligned monosynch or implore.
WANPIPE® routing stack is entirely autonomous of TDM voice submissions for whole system dependability.
WANPIPE® supports proficient, field-experienced, and dependable structure communicates, PPP, HDLC, and K.25.

Sangoma A102B-K

2009-09-07T07:04:00.000-07:00

Sangoma A102B-K Asterisk E1/PRI Voice/records license (PCIe) with Echo postponement; 2 ports
The product of A102 is the double port edition of Sangoma’s family of superior, Elastic Telecommunications (AFT) hardware considered for optimum hold up of voice and information over T1, E1 and J1.

Accessible in both PCI (A102) and PCI communicate (A102-K) form issues, The A102 offers up to 8.4Mbps of full duplex data throughput or 50 voice calls over two T1 and or E1 positions to support elevated performance PCI-based steering and telephony structures. Superior clocking characteristics allow E1 and T1 lines to be varied with occupied organization. As ingredient of Sangoma’s AFT series of products, the A102 formulates use of the identical elevated performance PCI crossing point that has been deployed in huge quantities all in excess of the world for humankind. The obtainable A102b and A102b-K cards comprise Classic's DSP hardware and proficient algorithms providing carrier-evaluation echo annulment and Voice excellence quality Enhancement (VQE) purposes. Approximating all the Sangoma AFT family, the A102 is meadow upgradeable to take benefits of hardware and software enhancement as they become obtainable.

Technical specification
Two T1/E1 harbor with most excellent PCI communicates or PCI interface for high performance voice and statistics applications.
For this product TDM clocking method: Network timing can be approved from a network -connected DS0 to any or all of the other seaports. Equally T1 and E1 are supported concurrently, making it probable to mix T1 channel banks and E1 networks with occupied channel harmonization.
Line decoding: In this series HDC3, AMI, and B8ZS.
Framing: CRC4, non-CRC4, ESF, D4T1/E1.
Hold up for the Asterisk™, OPAL™ Yates, Gratis Switch™ PBX/IVR assignments, as well as other Open foundation and proprietary PBX/Switch/IVR/VIP gateway submissions.
All of Sangoma’s AFT inventions use the identical base PCI interface card and the similar efficiently engineered firmware on the same relations of Field improvable entrance Arrays.
A102, A102b PCI: Completely compatible by means of all commercially obtainable motherboards—suitable PCI-standard break off distribution without manual enhancement.
A102-k, A102b-k PCI articulate: 1 Path PCI converse to the bus technology
Magnitudes: 2U Form feature: 125 mm x 55 mm for use in constrained framework.
Includes excellence quality, experienced RJ45 cable and short 2U increasing clips for installation in 2U stand accumulate servers.
High superiority experienced RJ45 cables incorporated.
Supremacy: 800 mA climax quality, ready 320 mA be very successful at +3.3 V or 7 V.
High temperature range: 0–53 °C.
Auto intellect compatibility through 5 V and 3.3 V PCI busses.
Intellectual hardware: Downloadable FPGA indoctrination with various operating methods. Insert new features connected to voice and/or figures of the hardware when they are converted into accessible.
32-bit bus master DMA data interactions crossways PCI interface at 132 Mbytes/sec for smallest amount congregation processor interference.
Circle buffer DMA treatment for smallest amount of host intercession and guaranteed information honesty on high capacity systems.
Maintain the Robbed Bit Channel coupled indications (CAS) and ISDN PRI.
There is T1/E1 and incomplete T1/E1, several channel HDLC for each line for assorted data/TDM voice applications.
Optimized for each channel DMA watercourse and hardware-level HDLC managing deliver the host CPU.
EDAC™ (copyright pending) technology will be incorporated to radically reduce the expenditure of echo annulment.
Pasture improvable hardware allows for innovative TDM-related occupations to be additional as they become obtainable.
Use unprocessed bit stream crossing point to hold up arbitrary non-standard line procedures, such as non-byte aligned monosynch or implore.
WANPIPE® routing stack is entirely autonomous of TDM voice submissions for whole system dependability. WANPIPE® supports proficient, field-experienced, and dependable structure communicates, PPP, HDLC, and K.25.

Sangoma A101-K

2009-09-06T03:04:00.000-07:00

Sangoma A101K solitary T1/E1 Interface certificate Asterisk Interoperable PCI articulate.
Through Sangoma certificates, you can forever take benefit of hardware and software enhancements, as soon as they turn out to be accessible. The A101BX, resembling the entire cards in Sangoma’s AFT family, is field promote able with crash-confirmation firmware. Prefer the Sangoma A101B and A101K cards with Octasic's DSP hardware and certified algorithms to achieve carrier-status echo termination and Voice superiority improvement functions on your open source or even proprietary telephone structure.

Sangoma A101B Specifications
One T1/E1 harbor with most excellent PCI communicates or PCI interface for high performance voice and statistics applications.
Line decoding: HDC3, AMI, and B8ZS.
Framing: CRC5-, Non CRC5, SF, D5. Also companionable with Japan’s J1
Hold up for Asterisk TM, Yates TM, and gratis Switch TM PBK/IVR assignments, as well as additional open foundation and proprietary PBK/Switch/IVR/VIP opportunity relevancies.
All of Sangoma’s AFT inventions use the identical base PCI interface card and the similar efficiently engineered firmware on the same relations of Field improvable entrance Arrays.
Completely compatible by means of all commercially obtainable motherboards—suitable PCI-standard break off distribution without manual enhancement.
A101D-K and A101-K PCI articulate: 1 Path PCI converse to the bus technology.
Magnitudes: 2U Form feature: 125 mm x 55 mm for use in constrained framework.
Includes excellence quality, experienced RJ45 cable and short 2U increasing clips for installation in 2U stand accumulate servers.
Supremacy: 800 mA climax quality, ready 320 mA be very successful at +3.3 V or 7 V.
High temperature range: 0–53 °C.
Auto intellect compatibility through 5 V and 3.3 V PCI busses.
Intellectual hardware: Downloadable FPGA indoctrination with various operating methods. Insert new features connected to voice and/or figures of the hardware when they are converted into accessible.
32-bit bus master DMA data interactions crossways PCI interface at 132 Mbytes/sec for smallest amount congregation processor interference.
Circle buffer DMA treatment for smallest amount of host intercession and guaranteed information honesty on high capacity systems.
Maintain the Robbed Bit Channel coupled indications (CAS) and ISDN PRI.
There is T1/E1 and incomplete T1/E1, several channel HDLC for each line for assorted data/TDM voice applications.
Optimized for each channel DMA watercourse and hardware-level HDLC managing deliver the host CPU.
Use unprocessed bit stream crossing point to hold up arbitrary non-standard line procedures, such as non-byte aligned monosynch or implore.
WANPIPE® routing stack is entirely autonomous of TDM voice submissions for whole system dependability. WANPIPE® supports proficient, field-experienced, and dependable structure communicates, PPP, HDLC, and K.25.

Sangoma A101b-K

2009-09-05T00:35:00.000-07:00

The A101 is component of Sangoma's family unit of superior bendable Telecommunications hardware invention line—it exploit the same high-performance PCI or PCI communicate interface that is providing advanced presentation in significant systems all in excess of the world for humankind. The A101 supports up to 2.047 Mbps of full duplex information throughput or up to 31 voice calls over a solitary T1, E1, or J1 procession.

Sangoma A101bK particular T1/E1 Interface Card Asterisk Interoperable PCI communicate with reverberation annulment
Through Sangoma certificates, you can forever take benefit of hardware and software enhancements, as soon as they turn out to be accessible. The A101BK, resembling the entire cards in Sangoma’s AFT family, is field promote able with crash-confirmation firmware. Prefer the Sangoma A101B and A101BK cards with Octasic's DSP hardware and certified algorithms to achieve carrier-status echo termination and Voice superiority improvement functions on your open source or even proprietary telephone structure.

Sangoma A101B stipulation
One T1/E1 harbor with most excellent PCI communicates or PCI interface for high performance voice and statistics applications.
Line decoding: HDC3, AMI, and B8ZS.
Framing: CRC4-, Non CRC4, SF, D4. Also companionable with Japan’s J1.
Hold up for Asterisk TM, Yates TM, and gratis Switch TM PBK/IVR assignments, as well as additional open foundation and proprietary PBK/Switch/IVR/VIP opportunity relevancies.
All of Sangoma’s AFT inventions use the identical base PCI interface card and the similar efficiently engineered firmware on the same relations of Field improvable entrance Arrays.
Completely compatible by means of all commercially obtainable motherboards—suitable PCI-standard break off distribution without manual enhancement.
A101-K and A101D-K PCI articulate: 1 Path PCI converse to the bus technology.
Magnitudes: 2U Form feature: 125 mm x 55 mm for use in constrained framework.
Includes excellence quality, experienced RJ45 cable and short 2U increasing clips for installation in 2U stand accumulate servers.
Supremacy: 800 mA climax quality, ready 320 mA be very successful at +3.3 V or 7 V.
High temperature range: 0–53 °C.
Auto intellect compatibility through 5 V and 3.3 V PCI busses.
Intellectual hardware: Downloadable FPGA indoctrination with various operating methods. Insert new features connected to voice and/or figures of the hardware when they are converted into accessible.
32-bit bus master DMA data interactions crossways PCI interface at 132 Mbytes/sec for smallest amount congregation processor interference.
Circle buffer DMA treatment for smallest amount of host intercession and guaranteed information honesty on high capacity systems.
Maintain the Robbed Bit Channel coupled indications (CAS) and ISDN PRI.
There is T1/E1 and incomplete T1/E1, several channel HDLC for each line for assorted data/TDM voice applications.
Optimized for each channel DMA watercourse and hardware-level HDLC managing deliver the host CPU.
Use unprocessed bit stream crossing point to hold up arbitrary non-standard line procedures, such as non-byte aligned monosynch or implore.
WANPIPE® routing stack is entirely autonomous of TDM voice submissions for whole system dependability. WANPIPE® supports proficient, field-experienced, and dependable structure communicates, PPP, HDLC, and K.25.

Sirrix PCI4S0

2009-09-03T23:40:00.000-07:00

This is a PCI-based ISDN interface card. This card gives 4 BRI (Basic Rate Interface) ports that can be linked directly to both, the public ISDN network and to ISDN consumer devices similar to telephones and fax machines. Sirrix PCI4S0 is entirely ISDN combatable and consequently, it can be utilized for voice applications and also for data communications.

Features:
This card’s ports can be employed as internal or external ports (TE / NT - Mode)
Programmable gate collection on board (FPGA)
This card also has an optional feature of the encryption with zero-delay
For the best quality of this card it is powered by switch able 100 Ohm terminations
This card has internal 40V power supply
High quality integrated Sirrix PCM bus is also included in this card
This card also has the channel-driver for Asterisk PBX software

In additional hardware ISDN-Stake features PCI V2.1 card is the most important for the comprehensive implementation of the notify information element. In the hardware features of this card the echo cancellation also include in which the end user of this product can change the echo frequencies for the comfort of the listings. Further more in the element scalability of this card is the transparent encryption with low delay of B-channels with a random block.

Sixnet ET9MS5

2009-09-03T00:27:00.000-07:00

Sixnet ET9MS5 card is the auto-detecting 10/100 Mbps operation system. This card also has SNMP network management for dependability and error detection. Rapid Spanning Tree (RSTP) holds up superfluous rings. This card has an extra feature of superior safety with authentication as well as encryption features. It also has the ultra consistent with more than 1 million hours MTBF. Sixnet ET9MS5 is the high quality device which overcomes on all the previous cards in this category it also includes Industrial rated -40ºC to 70ºC operation. With the latest technologies it has UL, CSA, CE as well as Zone 2 rated.

Real-time deterministic performance
SIXNET ET9MS5 Real-time Switches are one of the most excellent and simplest ways to guarantee the real-time operation of your automation as well as control system. They give lofty throughput (3.2 Gbps, non-blocking) to make sure no delays as well as particular handling for the several repeated short messages found in real-time polled systems. With plug and play simplicity, easily install these vigorous switches and you will instantly gather the reimbursement of improved performance. By giving improved message routing with eliminating message crash, these switches permit for true network determinism.

SIXNET ET9MS5 Switches deliver ultra-reliability
SIXNET ET9MS5 Real-time Switches have field-proven dependability of further than 1,000,000 hours MTBF. These SIXNET ET9MS5 technologically toughened switches are rated to endure in your callous environment – even outdoors in nautical and military applications. You can count up on SIXNET ET9MS5, who has been formulating industrialized hardware for over 20 years.

Industrial switches survive heat & cold

SIXNET ET9MS5 industrial switches work consistently during the dead of winter and those sizzling summer days. Dissimilar some industrial switches that are only displayed saleable switches (this means they are not actually intended for extended temperature operation), SIXNET ET9MS5 industrial switches are intended only for which places that you do not desire to be - over an industry finest temperature range of -40 to 85 °C. Over one billion operation hours devoid of a temperature associated failure verify that SIXNET ET9MS5 industrial switches endure!

Sixnet ET9MS4

2009-09-01T23:28:00.000-07:00

Sixnet ET9MS4 card is the auto-detecting 10/100 Mbps operation system. This card also has SNMP network management for dependability and error detection. Rapid Spanning Tree (RSTP) holds up superfluous rings. This card has an extra feature of superior safety with authentication as well as encryption features. It also has the ultra consistent with more than 1 million hours MTBF. Sixnet ET9MS4 is the high quality device which overcomes on all the previous cards in this category it also includes Industrial rated -40ºC to 70ºC operation. With the latest technologies it has UL, CSA, CE as well as Zone 2 rated.

Real-time deterministic performance
SIXNET ET9MS4 Real-time Switches are one of the most excellent and simplest ways to guarantee the real-time operation of your automation as well as control system. They give lofty throughput (3.2 Gbps, non-blocking) to make sure no delays as well as particular handling for the several repeated short messages found in real-time polled systems. With plug and play simplicity, easily install these vigorous switches and you will instantly gather the reimbursement of improved performance. By giving improved message routing with eliminating message crash, these switches permit for true network determinism.

SIXNET ET9MS4 Switches deliver ultra-reliability
SIXNET ET9MS4 Real-time Switches have field-proven dependability of further than 1,000,000 hours MTBF. These SIXNET ET9MS4 technologically toughened switches are rated to endure in your callous environment – even outdoors in nautical and military applications. You can count up on SIXNET ET9MS4, who has been formulating industrialized hardware for over 20 years.

Industrial switches survive heat & cold

SIXNET ET9MS4 industrial switches work consistently during the dead of winter and those sizzling summer days. Dissimilar some industrial switches that are only displayed saleable switches (this means they are not actually intended for extended temperature operation), SIXNET ET9MS4 industrial switches are intended only for which places that you do not desire to be - over an industry finest temperature range of -40 to 85 °C. Over one billion operation hours devoid of a temperature associated failure verify that SIXNET ET9MS4 industrial switches endure!

Sixnet ET9MS3

2009-08-31T23:06:00.000-07:00

Sixnet ET9MS3 card is the auto-detecting 10/100 Mbps operation system. This card also has SNMP network management for dependability and error detection. Rapid Spanning Tree (RSTP) holds up superfluous rings. This card has an extra feature of superior safety with authentication as well as encryption features. It also has the ultra consistent with more than 1 million hours MTBF. Sixnet ET9MS3 is the high quality device which overcomes on all the previous cards in this category it also includes Industrial rated -40ºC to 70ºC operation. With the latest technologies it has UL, CSA, CE as well as Zone 2 rated.

Real-time deterministic performance
SIXNET ET9MS3 Real-time Switches are one of the most excellent and simplest ways to guarantee the real-time operation of your automation as well as control system. They give lofty throughput (3.2 Gbps, non-blocking) to make sure no delays as well as particular handling for the several repeated short messages found in real-time polled systems. With plug and play simplicity, easily install these vigorous switches and you will instantly gather the reimbursement of improved performance. By giving improved message routing with eliminating message crash, these switches permit for true network determinism.

SIXNET ET9MS3 Switches deliver ultra-reliability
SIXNET ET9MS3 Real-time Switches have field-proven dependability of further than 1,000,000 hours MTBF. These SIXNET ET9MS3 technologically toughened switches are rated to endure in your callous environment – even outdoors in nautical and military applications. You can count up on SIXNET ET9MS3, who has been formulating industrialized hardware for over 20 years.

Industrial switches survive heat & cold
SIXNET ET9MS3 industrial switches work consistently during the dead of winter and those sizzling summer days. Dissimilar some industrial switches that are only displayed saleable switches (this means they are not actually intended for extended temperature operation), SIXNET ET9MS3 industrial switches are intended only for which places that you do not desire to be - over an industry finest temperature range of -40 to 85 °C. Over one billion operation hours devoid of a temperature associated failure verify that SIXNET ET9MS3 industrial switches endure!

Sixnet ET9MS2

2009-08-31T07:46:00.000-07:00

Sixnet ET9MS2 card is the auto-detecting 10/100 Mbps operation system. This card also has SNMP network management for dependability and error detection. Rapid Spanning Tree (RSTP) holds up superfluous rings. This card has an extra feature of superior safety with authentication as well as encryption features. It also has the ultra consistent with more than 1 million hours MTBF. Sixnet ET9MS2 is the high quality device which overcomes on all the previous cards in this category it also includes Industrial rated -40ºC to 70ºC operation. With the latest technologies it has UL, CSA, CE as well as Zone 2 rated.

Real-time deterministic performance
SIXNET ET9MS2 Real-time Switches are one of the most excellent and simplest ways to guarantee the real-time operation of your automation as well as control system. They give lofty throughput (3.2 Gbps, non-blocking) to make sure no delays as well as particular handling for the several repeated short messages found in real-time polled systems. With plug and play simplicity, easily install these vigorous switches and you will instantly gather the reimbursement of improved performance. By giving improved message routing with eliminating message crash, these switches permit for true network determinism.

SIXNET ET9MS2 Switches deliver ultra-reliability
SIXNET ET9MS2 Real-time Switches have field-proven dependability of further than 1,000,000 hours MTBF. These SIXNET ET9MS2 technologically toughened switches are rated to endure in your callous environment – even outdoors in nautical and military applications. You can count up on SIXNET ET9MS2, who has been formulating industrialized hardware for over 20 years.

Industrial switches survive heat & cold

SIXNET ET9MS2 industrial switches work consistently during the dead of winter and those sizzling summer days. Dissimilar some industrial switches that are only displayed saleable switches (this means they are not actually intended for extended temperature operation), SIXNET ET9MS2 industrial switches are intended only for which places that you do not desire to be - over an industry finest temperature range of -40 to 85 °C. Over one billion operation hours devoid of a temperature associated failure verify that SIXNET ET9MS2 industrial switches endure!

Sixnet ET9MS1

2009-08-29T16:45:00.000-07:00

Sixnet ET9MS1 card is the auto-detecting 10/100 Mbps operation system. This card also has SNMP network management for dependability and error detection. Rapid Spanning Tree (RSTP) holds up superfluous rings. This card has an extra feature of superior safety with authentication as well as encryption features. It also has the ultra consistent with more than 1 million hours MTBF. Sixnet ET9MS1 is the high quality device which overcomes on all the previous cards in this category it also includes Industrial rated -40ºC to 70ºC operation. With the latest technologies it has UL, CSA, CE as well as Zone 2 rated.

Real-time deterministic performance
SIXNET ET9MS1 Real-time Switches are one of the most excellent and simplest ways to guarantee the real-time operation of your automation as well as control system. They give lofty throughput (3.2 Gbps, non-blocking) to make sure no delays as well as particular handling for the several repeated short messages found in real-time polled systems. With plug and play simplicity, easily install these vigorous switches and you will instantly gather the reimbursement of improved performance. By giving improved message routing with eliminating message crash, these switches permit for true network determinism.

SIXNET ET9MS1 Switches deliver ultra-reliability
SIXNET ET9MS1 Real-time Switches have field-proven dependability of further than 1,000,000 hours MTBF. These SIXNET ET9MS1 technologically toughened switches are rated to endure in your callous environment – even outdoors in nautical and military applications. You can count up on SIXNET ET9MS1, who has been formulating industrialized hardware for over 20 years.

Industrial switches survive heat & cold
SIXNET ET9MS1 industrial switches work consistently during the dead of winter and those sizzling summer days. Dissimilar some industrial switches that are only displayed saleable switches (this means they are not actually intended for extended temperature operation), SIXNET ET9MS1 industrial switches are intended only for which places that you do not desire to be - over an industry finest temperature range of -40 to 85 °C. Over one billion operation hours devoid of a temperature associated failure verify that SIXNET ET9MS1 industrial switches endure!

Sixnet ET9MG1

2009-08-29T01:24:00.000-07:00

Sixnet ET9MG1 card is the auto-detecting 10/100 Mbps operation system. This card also has SNMP network management for dependability and error detection. Rapid Spanning Tree (RSTP) holds up superfluous rings. This card has an extra feature of superior safety with authentication as well as encryption features. It also has the ultra consistent with more than 1 million hours MTBF. Sixnet ET9MG1 is the high quality device which overcomes on all the previous cards in this category it also includes Industrial rated -40ºC to 70ºC operation. With the latest technologies it has UL, CSA, CE as well as Zone 2 rated.

Real-time deterministic performance
SIXNET ET9MG1 Real-time Switches are one of the most excellent and simplest ways to guarantee the real-time operation of your automation as well as control system. They give lofty throughput (3.2 Gbps, non-blocking) to make sure no delays as well as particular handling for the several repeated short messages found in real-time polled systems. With plug and play simplicity, easily install these vigorous switches and you will instantly gather the reimbursement of improved performance. By giving improved message routing with eliminating message crash, these switches permit for true network determinism.

SIXNET ET9MG1 Switches deliver ultra-reliability
SIXNET ET9MG1 Real-time Switches have field-proven dependability of further than 1,000,000 hours MTBF. These SIXNET ET9MG1 technologically toughened switches are rated to endure in your callous environment – even outdoors in nautical and military applications. You can count up on SIXNET ET9MG1, who has been formulating industrialized hardware for over 20 years.

Industrial switches survive heat & cold

SIXNET ET9MG1 industrial switches work consistently during the dead of winter and those sizzling summer days. Dissimilar some industrial switches that are only displayed saleable switches (this means they are not actually intended for extended temperature operation), SIXNET ET9MG1 industrial switches are intended only for which places that you do not desire to be - over an industry finest temperature range of -40 to 85 °C. Over one billion operation hours devoid of a temperature associated failure verify that SIXNET ET9MG1 industrial switches endure!

Sixnet ET5RS4

2009-08-28T04:44:00.000-07:00

This card has an additional feature of dual (redundant) power inputs as well as an alarm output. Sixnet ET5RS4 card is the auto-detecting 10/100 Mbps operation system. This card also comprise on the MDI/MDIX Auto crossover (no require for cross-wired cables). Sixnet ET5RS4 is the high quality device which overcomes on all the previous cards in this category it also includes Industrial rated -40ºC to 85ºC operation. With the latest technologies it has UL, CSA, CE as well as Zone 2 rated.

Real-time deterministic performance
SIXNET ET5RS4 Real-time Switches are one of the most excellent and simplest ways to guarantee the real-time operation of your automation as well as control system. They give lofty throughput (3.2 Gbps, non-blocking) to make sure no delays as well as particular handling for the several repeated short messages found in real-time polled systems. With plug and play simplicity, easily install these vigorous switches and you will instantly gather the reimbursement of improved performance. By giving improved message routing with eliminating message crash, these switches permit for true network determinism.

SIXNET ET5RS4 Switches deliver ultra-reliability
SIXNET ET5RS4 Real-time Switches have field-proven dependability of further than 1,000,000 hours MTBF. These SIXNET ET5RS4 technologically toughened switches are rated to endure in your callous environment – even outdoors in nautical and military applications. You can count up on SIXNET ET5RS4, who has been formulating industrialized hardware for over 20 years.

Industrial switches survive heat & cold

SIXNET ET5RS4 industrial switches work consistently during the dead of winter and those sizzling summer days. Dissimilar some industrial switches that are only displayed saleable switches (this means they are not actually intended for extended temperature operation), SIXNET ET5RS4 industrial switches are intended only for which places that you do not desire to be - over an industry finest temperature range of -40 to 85 °C. Over one billion operation hours devoid of a temperature associated failure verify that SIXNET ET5RS4 industrial switches endure!

Sixnet ET5RS3

2009-08-27T01:01:00.000-07:00

This card has an additional feature of dual (redundant) power inputs as well as an alarm output. Sixnet ET5RS3 card is the auto-detecting 10/100 Mbps operation system. This card also comprise on the MDI/MDIX Auto crossover (no require for cross-wired cables). Sixnet ET5RS3 is the high quality device which overcomes on all the previous cards in this category it also includes Industrial rated -40ºC to 85ºC operation. With the latest technologies it has UL, CSA, CE as well as Zone 2 rated.

Real-time deterministic performance
SIXNET ET5RS3 Real-time Switches are one of the most excellent and simplest ways to guarantee the real-time operation of your automation as well as control system. They give lofty throughput (3.2 Gbps, non-blocking) to make sure no delays as well as particular handling for the several repeated short messages found in real-time polled systems. With plug and play simplicity, easily install these vigorous switches and you will instantly gather the reimbursement of improved performance. By giving improved message routing with eliminating message crash, these switches permit for true network determinism.

SIXNET ET5RS3 Switches deliver ultra-reliability
SIXNET ET5RS3 Real-time Switches have field-proven dependability of further than 1,000,000 hours MTBF. These SIXNET ET5RS3 technologically toughened switches are rated to endure in your callous environment – even outdoors in nautical and military applications. You can count up on SIXNET ET5RS3, who has been formulating industrialized hardware for over 20 years.

Industrial switches survive heat & cold

SIXNET ET5RS3 industrial switches work consistently during the dead of winter and those sizzling summer days. Dissimilar some industrial switches that are only displayed saleable switches (this means they are not actually intended for extended temperature operation), SIXNET ET5RS3 industrial switches are intended only for which places that you do not desire to be - over an industry finest temperature range of -40 to 85 °C. Over one billion operation hours devoid of a temperature associated failure verify that SIXNET ET5RS3 industrial switches endure!

Sixnet ET5RS2

2009-08-26T00:39:00.000-07:00

This card has an additional feature of dual (redundant) power inputs as well as an alarm output. Sixnet ET5RS2 card is the auto-detecting 10/100 Mbps operation system. This card also comprise on the MDI/MDIX Auto crossover (no require for cross-wired cables). Sixnet ET5RS2 is the high quality device which overcomes on all the previous cards in this category it also includes Industrial rated -40ºC to 85ºC operation. With the latest technologies it has UL, CSA, CE as well as Zone 2 rated.

Real-time deterministic performance
SIXNET ET5RS2 Real-time Switches are one of the most excellent and simplest ways to guarantee the real-time operation of your automation as well as control system. They give lofty throughput (3.2 Gbps, non-blocking) to make sure no delays as well as particular handling for the several repeated short messages found in real-time polled systems. With plug and play simplicity, easily install these vigorous switches and you will instantly gather the reimbursement of improved performance. By giving improved message routing with eliminating message crash, these switches permit for true network determinism.

SIXNET ET5RS2 Switches deliver ultra-reliability
SIXNET ET5RS2 Real-time Switches have field-proven dependability of further than 1,000,000 hours MTBF. These SIXNET ET5RS2 technologically toughened switches are rated to endure in your callous environment – even outdoors in nautical and military applications. You can count up on SIXNET ET5RS2, who has been formulating industrialized hardware for over 20 years.

Industrial switches survive heat & cold

SIXNET ET5RS2 industrial switches work consistently during the dead of winter and those sizzling summer days. Dissimilar some industrial switches that are only displayed saleable switches (this means they are not actually intended for extended temperature operation), SIXNET ET5RS2 industrial switches are intended only for which places that you do not desire to be - over an industry finest temperature range of -40 to 85 °C. Over one billion operation hours devoid of a temperature associated failure verify that SIXNET ET5RS2 industrial switches endure!

Sixnet ET5RS1

2009-08-25T01:20:00.000-07:00

This card has an additional feature of dual (redundant) power inputs as well as an alarm output. Sixnet ET5RS1 card is the auto-detecting 10/100 Mbps operation system. This card also comprise on the MDI/MDIX Auto crossover (no require for cross-wired cables). Sixnet ET5RS1 is the high quality device which overcomes on all the previous cards in this category it also includes Industrial rated -40ºC to 85ºC operation. With the latest technologies it has UL, CSA, CE as well as Zone 2 rated.

Real-time deterministic performance
SIXNET ET5RS1 Real-time Switches are one of the most excellent and simplest ways to guarantee the real-time operation of your automation as well as control system. They give lofty throughput (3.2 Gbps, non-blocking) to make sure no delays as well as particular handling for the several repeated short messages found in real-time polled systems. With plug and play simplicity, easily install these vigorous switches and you will instantly gather the reimbursement of improved performance. By giving improved message routing with eliminating message crash, these switches permit for true network determinism.

SIXNET ET5RS1 Switches deliver ultra-reliability
SIXNET ET5RS1 Real-time Switches have field-proven dependability of further than 1,000,000 hours MTBF. These SIXNET ET5RS1 technologically toughened switches are rated to endure in your callous environment – even outdoors in nautical and military applications. You can count up on SIXNET ET5RS1, who has been formulating industrialized hardware for over 20 years.

Industrial switches survive heat & cold

SIXNET ET5RS1 industrial switches work consistently during the dead of winter and those sizzling summer days. Dissimilar some industrial switches that are only displayed saleable switches (this means they are not actually intended for extended temperature operation), SIXNET ET5RS1 industrial switches are intended only for which places that you do not desire to be - over an industry finest temperature range of -40 to 85 °C. Over one billion operation hours devoid of a temperature associated failure verify that SIXNET ET5RS1 industrial switches endure!

Sixnet ET5ES4

2009-08-24T01:13:00.000-07:00

Sixnet ET5ES4 card is the auto-detecting 10/100 Mbps operation system. This card also comprise on the MDI/MDIX Auto crossover (no require for cross-wired cables). Sixnet ET5ES4 is the high quality device which overcomes on all the previous cards in this category it also includes Industrial rated -40ºC to 85ºC operation. With the latest technologies it has UL, CSA, CE as well as Zone 2 rated. Experienced for marine as well as offshore utilized by DNV. Sixnet ET5ES4 includes the plug and play operation system. This card holds up ALL IEEE 802.3 Ethernet protocols.

Real-time deterministic performance
SIXNET ET5ES4 Real-time Switches are one of the most excellent and simplest ways to guarantee the real-time operation of your automation as well as control system. They give lofty throughput (3.2 Gbps, non-blocking) to make sure no delays as well as particular handling for the several repeated short messages found in real-time polled systems. With plug and play simplicity, easily install these vigorous switches and you will instantly gather the reimbursement of improved performance. By giving improved message routing with eliminating message crash, these switches permit for true network determinism.

SIXNET ET5ES4 Switches deliver ultra-reliability
SIXNET ET5ES4 Real-time Switches have field-proven dependability of further than 1,000,000 hours MTBF. These SIXNET ET5ES4 technologically toughened switches are rated to endure in your callous environment – even outdoors in nautical and military applications. You can count up on SIXNET ET5ES4, who has been formulating industrialized hardware for over 20 years.

Industrial switches survive heat & cold

SIXNET ET5ES4 industrial switches work consistently during the dead of winter and those sizzling summer days. Dissimilar some industrial switches that are only displayed saleable switches (this means they are not actually intended for extended temperature operation), SIXNET ET5ES4 industrial switches are intended only for which places that you do not desire to be - over an industry finest temperature range of -40 to 85 °C. Over one billion operation hours devoid of a temperature associated failure verify that SIXNET ET5ES4 industrial switches endure!

Sixnet ET5ES3

2009-08-23T04:51:00.000-07:00

Sixnet ET5ES3 card is the auto-detecting 10/100 Mbps operation system. This card also comprise on the MDI/MDIX Auto crossover (no require for cross-wired cables). Sixnet ET5ES3 is the high quality device which overcomes on all the previous cards in this category it also includes Industrial rated -40ºC to 85ºC operation. With the latest technologies it has UL, CSA, CE as well as Zone 2 rated. Experienced for marine as well as offshore utilized by DNV. Sixnet ET5ES3 includes the plug and play operation system. This card holds up ALL IEEE 802.3 Ethernet protocols.

Real-time deterministic performance
SIXNET ET5ES3 Real-time Switches are one of the most excellent and simplest ways to guarantee the real-time operation of your automation as well as control system. They give lofty throughput (3.2 Gbps, non-blocking) to make sure no delays as well as particular handling for the several repeated short messages found in real-time polled systems. With plug and play simplicity, easily install these vigorous switches and you will instantly gather the reimbursement of improved performance. By giving improved message routing with eliminating message crash, these switches permit for true network determinism.

SIXNET ET5ES3 Switches deliver ultra-reliability
SIXNET ET5ES3 Real-time Switches have field-proven dependability of further than 1,000,000 hours MTBF. These SIXNET ET5ES3 technologically toughened switches are rated to endure in your callous environment – even outdoors in nautical and military applications. You can count up on SIXNET ET5ES3, who has been formulating industrialized hardware for over 20 years.

Industrial switches survive heat & cold

SIXNET ET5ES3 industrial switches work consistently during the dead of winter and those sizzling summer days. Dissimilar some industrial switches that are only displayed saleable switches (this means they are not actually intended for extended temperature operation), SIXNET ET5ES3 industrial switches are intended only for which places that you do not desire to be - over an industry finest temperature range of -40 to 85 °C. Over one billion operation hours devoid of a temperature associated failure verify that SIXNET ET5ES3 industrial switches endure!

Sixnet ET5ES2

2009-08-21T21:10:00.000-07:00

Sixnet ET5ES2 card is the auto-detecting 10/100 Mbps operation system. This card also comprise on the MDI/MDIX Auto crossover (no require for cross-wired cables). Sixnet ET5ES2 is the high quality device which overcomes on all the previous cards in this category it also includes Industrial rated -40ºC to 85ºC operation. With the latest technologies it has UL, CSA, CE as well as Zone 2 rated. Experienced for marine as well as offshore utilized by DNV. Sixnet ET5ES2 includes the plug and play operation system. This card holds up ALL IEEE 802.3 Ethernet protocols.

Real-time deterministic performance
SIXNET ET5ES2 Real-time Switches are one of the most excellent and simplest ways to guarantee the real-time operation of your automation as well as control system. They give lofty throughput (3.2 Gbps, non-blocking) to make sure no delays as well as particular handling for the several repeated short messages found in real-time polled systems. With plug and play simplicity, easily install these vigorous switches and you will instantly gather the reimbursement of improved performance. By giving improved message routing with eliminating message crash, these switches permit for true network determinism.

SIXNET ET5ES2 Switches deliver ultra-reliability
SIXNET ET5ES2 Real-time Switches have field-proven dependability of further than 1,000,000 hours MTBF. These SIXNET ET5ES2 technologically toughened switches are rated to endure in your callous environment – even outdoors in nautical and military applications. You can count up on SIXNET ET5ES2, who has been formulating industrialized hardware for over 20 years.

Industrial switches survive heat & coldSIXNET ET5ES2 industrial switches work consistently during the dead of winter and those sizzling summer days. Dissimilar some industrial switches that are only displayed saleable switches (this means they are not actually intended for extended temperature operation), SIXNET ET5ES2 industrial switches are intended only for which places that you do not desire to be - over an industry finest temperature range of -40 to 85 °C. Over one billion operation hours devoid of a temperature associated failure verify that SIXNET ET5ES2 industrial switches endure!

Sixnet ET5ES1

2009-08-21T00:53:00.000-07:00

Sixnet ET5ES1 card is the auto-detecting 10/100 Mbps operation system. This card also comprise on the MDI/MDIX Auto crossover (no require for cross-wired cables). Sixnet ET5ES1 is the high quality device which overcomes on all the previous cards in this category it also includes Industrial rated -40ºC to 85ºC operation. With the latest technologies it has UL, CSA, CE as well as Zone 2 rated. Experienced for marine as well as offshore utilized by DNV. Sixnet ET5ES1 includes the plug and play operation system. This card holds up ALL IEEE 802.3 Ethernet protocols.

Real-time deterministic performance
SIXNET ET5ES1 Real-time Switches are one of the most excellent and simplest ways to guarantee the real-time operation of your automation as well as control system. They give lofty throughput (3.2 Gbps, non-blocking) to make sure no delays as well as particular handling for the several repeated short messages found in real-time polled systems. With plug and play simplicity, easily install these vigorous switches and you will instantly gather the reimbursement of improved performance. By giving improved message routing with eliminating message crash, these switches permit for true network determinism.

SIXNET ET5ES1 Switches deliver ultra-reliability
SIXNET ET5ES1 Real-time Switches have field-proven dependability of further than 1,000,000 hours MTBF. These SIXNET ET5ES1 technologically toughened switches are rated to endure in your callous environment – even outdoors in nautical and military applications. You can count up on SIXNET ET5ES1, who has been formulating industrialized hardware for over 20 years.

Industrial switches survive heat & coldSIXNET ET5ES1 industrial switches work consistently during the dead of winter and those sizzling summer days. Dissimilar some industrial switches that are only displayed saleable switches (this means they are not actually intended for extended temperature operation), SIXNET ET5ES1 industrial switches are intended only for which places that you do not desire to be - over an industry finest temperature range of -40 to 85 °C. Over one billion operation hours devoid of a temperature associated failure verify that SIXNET ET5ES1 industrial switches endure!

Xoasis Prodigy Lite

2009-08-20T03:16:00.000-07:00

Xoasis Prodigy VoIP PBX Lite; 20 User Edition
Prodigy VoIP PBX Lite is a comprehensive trade phone system for up to 20 sets of phones. Prodigy VoIP offers project features at low business pricing with easy operation and management.

Prodigy VoIP PBX Lite supports equally usual analog and T1/E1 links as well as IP based links.

Features:

The best quality of this card is to support all main VoIP phones
PTSN integration is also including in the main feature of the Prodigy VoIP PBX Lite.
Prodigy VoIP PBX Lite offers Enterprise PBX features
Voicemail is also included
This phone is Auto attendant
Prodigy VoIP PBX Lite can be Dialed by name
Conferencing is also a exclusive feature of Prodigy VoIP PBX Lite
Prodigy VoIP PBX Lite has ability of Telecommuting
Call queuing is also additional feature
Prodigy VoIP PBX Lite provides the ability of CDR
Remote offices and extensions are provided by Prodigy VoIP PBX Lite
Unified messaging can be done by Prodigy VoIP PBX Lite
Prodigy VoIP PBX Lite have phone models SIP, MGCP
Prodigy VoIP PBX Lite supports Direct inward dial (DID)
Web based management is given by Prodigy VoIP
Web operator panel is used in Prodigy VoIP PBX Lite
Prodigy VoIP PBX Lite supports Analog phones
Prodigy VoIP PBX Lite has facility of Wide area extensions and dial plans.
Music on hold is an additional feature
Soft client support is also available on Prodigy VoIP PBX Lite
Web-based voicemail and FAX given by Prodigy VoIP Lite
Web-based click to dial given by Prodigy VoIP LiteMulti tenant supports by Prodigy VoIP Lite

Xoasis Prodigy

2009-08-18T23:31:00.000-07:00

Xoasis Prodigy VoIP PBX; 250 User versions
Prodigy VoIP PBX is a comprehensive phone trade method for up to 250 phones. Prodigy VoIP offers project features at low business pricing with easy operation and management.

Prodigy VoIP PBX supports both conventional analog and T1/E1 links as well as IP based links.

Features:
The best quality of this card is to support all main VoIP phones
PTSN integration is also including in the main feature of the Prodigy VoIP PBX.
Prodigy VoIP PBX offers Enterprise PBX features
Voicemail is also included
This phone is Auto attendant
Prodigy VoIP PBX can be Dialed by name
Conferencing is also a exclusive feature of Prodigy VoIP PBX
Prodigy VoIP PBX has ability of Telecommuting
Call queuing is also additional feature
Prodigy VoIP PBX provides the ability of CDR
Prodigy VoIP PBX provides the ability of FAX
Remote offices and extensions are provided by Prodigy VoIP PBX
Unified messaging can be done by Prodigy VoIP PBX
Prodigy VoIP PBX have phone models SIP, MGCP, H323, SKINNY
Prodigy VoIP PBX supports Direct inward dial (DID)
Web based management is given by Prodigy VoIP
Web operator panel is used in Prodigy VoIP PBX
Prodigy VoIP PBX supports Analog phones
Prodigy VoIP PBX has facility of Wide area extensions and dial plans.Prodigy VoIP PBX provides the ability of IVR

VoiSmart vISDN

2009-08-18T00:26:00.000-07:00

VoiSmart Asterisk ISDN BRI Card; 4 fundamental Rate Interface ports

Every port can be configured, individually, as a terminal (TE) or network (NT) port, it can be optionally set a 120 Ohm termination and can optional provide power to the bus.

VoiSmart vISDN is completely carried on by vISDN (http://www.visdn.org./), the multiservice ISDN style sponsored by Espia, proprietor of VoiSmart registered trademark, which let the full utilization of the board potential and features.

Essential Note: vISDN is for use with equally a 3.3 and 5.0 volt PCI slot.

ISDN is 100% Asterisk compatible.
Telecom Italia Labs certify the performance of ISDN protocol, as per TBR3 necessities and the strict compatibility limitation of Italian Public Network, as compulsory by Telecom Italia.

VoiSmart vISDN board has also two connectors for an outer PCM bus to tie other vISDN boards or E1 boards, or hardware DSP, soon offered by VoiSmart.

Technical features:
VoiSmart vISDN board has 2.2 PCI Bus (3.3V supply) support.
VoiSmart vISDN board has 4 BRI ports, RJ-45 plugs Interfaces
NT/TE, selectable jumper port configuration provided by VoiSmart vISDN board.
It is 120 Ohm / High Impedance terminations and dipswitch selectable VoiSmart vISDN board
The Power supply of VoiSmart vISDN board can be enable/disable via jumper
HDLC framer integrated for each channel on VoiSmart vISDN board
VoiSmart vISDN board provides One 2-color LED on each port

VoiSmart vGSM-4

2009-08-16T21:21:00.001-07:00

VoiSmart Asterisk GSM Card; 4 GSM channels
The first VoiSmart vGSM board is 100% Asterisk well-suited PCI bus card, for various channel (up to four) GSM communication management. This board permits systems integrators to convert very costly set to mobile voice travel into a lot cheaper mobile to mobile call supervision, with substantial savings.

No outer gateways required.

VoiSmart Asterisk GSM Card; 4 GSM channels is 100% well-matched with EU and US GSM networks (900/1800/1900 MHz) and with Brazil and Japan networks. SMS are handled in local modality, be thankful to a new Asterisk application for communication TX and RX, available free together with this board.

Important Note: vGSM is for use with both a 3.3 and 5.0 volt PCI slot.

VoiSmart Quad GSM board is provided with GPL open source drivers; this card is well-matched with all Linux / Asterisk systems, managing kernel version from 2.6.x onwards.

The external antenna is also included in the package.
Drivers are available on Asterisk official website for this card (kernel space), supply 4 TTY boundary for the indication section and a channel driver for the popular Asterisk Open Source PBX,

VoiSmart vGSM-2

2009-08-15T23:03:00.000-07:00

VoiSmart Asterisk GSM Card; 2 GSM channels

The new board is VoiSmart vGSM-2 of the vGSM group 100% Asterisk well-matched PCI bus card, for several channel (up to four) GSM contact board. This board permits systems integrators to convert greatly cost set to mobile voice transfer into greatly cheaper mobile to mobile call supervision, with significant savings. No outer gateways required in your Asterisk PBX. 100% well-matched with EU and US GSM networks (900 / 1800 / 1900 Mhz) and with Brazil and Japan networks. SMS are hold in local modality, thanks to a new Asterisk function for communication TX and RX, available free together with this board. VoiSmart vGSM-2 board is complete with GPL open source drivers; it is well-matched with all Linux / Asterisk systems, managing essential versions from 2.6.x (or later).

Powerful card for specialized

SIM multiplexing is supported by VGSM-2 board. This feature permits relating any SIM in any cards on the BUS PCI to a modem in any other card. SIM server functionalities for isolated and vital saving of any number of Smartcards/SIM are also supported.

Drivers accessible on official website for this card (kernel space), and a channel driver for the popular Asterisk Open Source PBX is also avail.

Take a quick look at features

VoiSmart vGSM-2 supporting Maximum SIMs: 4;
Hardware cross link between component, SIMs and SIM UARTs;
VoiSmart vGSM-2 SIM Server supports for isolated saving and management;
Full digital 16-bit linear audio paths;
Linux / Asterisk 100% well-matched (kernel from 2.6.x or later);
VoiSmart vGSM-2 working on GSM networks (900/1800/1900 MHz);
Free open source GPL drivers provided with the board;
External antenna fitted in VoiSmart vGSM-2
PCI 2.2 bus;
Local SMS TX / RX supervision;
Echo termination on GSM engines;
High competence thanks to multiple channels operation.

Technical Features

General:
VoiSmart vGSM-2 SIM Server for remote, saving and management;
4 SIMs provided per card,
Outside interface: 4 SMA/ multi source, F 50 Ohm antenna linkers;
VoiSmart vGSM-2 Radio interface: three bands GSM (900 / 1800 / 1900 MHz), phase 2/2+ compliant, class: Small MS, Output power: Class 4 (2W) in EGSM 900, Class 1 (1W) in GSM 1800 and GSM 1900; VoiSmart vGSM-2 card supports SMS: MT, MO, CB, text and PDU

VoiSmart SIPSMS Gateway 4 channels

2009-08-13T00:08:00.000-07:00

VoiSmart SIP/SMS Gateway; 4 Channels
VoiSmart SMS is an Asterisk-based IP Gateway which permits you to mail and get high quantity of SMS transfer in the easiest and most competent way. It's a proper black box, which can be achieved as an IP address, standing by to be configured as a correspondence server or a POP3 client. It permits compound RX/TX active GSM channels.

No additional hardware to be added, no fitting effort, no practical talent mandatory: a genuine plug and play appliance, proposed to formulate your business right away running. Simple to be incorporated with specialized SMS supervision systems, it is also an all in one system to begin transfer and getting SMSs from the most admired mailing applications (Lotus Notes, Outlook, etc.).

Take a quick look at features

Configurable also as Mail Server or POP3 Client
Wholly see-through towards legacy systems
All in one: no additional HW or SW required
Touble-free to integrate
Trouble-free to install
Immediate operation on multiple channels
VoiSmart SIP/SMS Gateway; 4 channels based on Open Source (Asterisk)
Permits broadcasting of SMSs via VoiSmart SIP/SMS Gateway; 4 channels
Unicode support for foreign alphabets
VoiSmart SIP/SMS Gateway; 4 channels gives you liberty of choosing your provider
Makes you master your business: no more promotion to be subscribe and designed in advance!
High competence thanks to numerous channels operationWarranty Period: 2-years Manufacturer’s Product

VoiSmart SIP GSM Gateway 4 to 32 Channels

2009-08-09T08:33:00.001-07:00

VoiSmart SIP/GSM Gateway; 4 to 32 Channels
VoiSmart SIP/GSM Gateway; 4 to 32 channels capability

VoiSmart Voice Gateway is an Asterisk based IP Gateway which permits you to convert fixed to mobile into mobile to mobile traffic in the easiest and most competent way. It is a right “black box”, which can be achieved as a SIP client/sever. It permits many at once active GSM channels (4 to 32).

The VoiSmart Gateways carry SIM server functionalities for isolated and middle save of any numeral of Smartcards /SIM. No additional hardware to be added, no fitting effort, no practical talent mandatory: a genuine plug and play appliance, proposed to formulate your business right away running. Consider it as a normal SIP client /server, and mixing is complete. LCR and smart routing of inward calls are right away available, and all its prevailing features.

Take a quick look at features

VoiSmart SIP/GSM Gateway; 4 to 32 Channels 19 inch Rack increased
VoIP optimized motherboard
4 to 32 active SIMs concurrently (one vGSM4 card every 4 SIMs)
preset Antennas
Reverberation deletion on GSM engines
Linux OS, SW establishment on Asterisk
completely configurable for the incorporation towards outer applications
Multicodec (G.711v, G.711a, g729, g726, ILBC, GSM)Warranty Period: 2-years Manufacturer’s warranty

VoiSmart SIP

2009-08-08T07:43:00.000-07:00

VoiSmart SIP/GSM Gateway; 4 Channels
VoiSmart Voice Gateway is an Asterisk-based IP Gateway which permits you to convert permanent to cell phone into mobile-to-mobile travel in the easiest and most competent way. It is a proper “black box”, which can be achieved as a SIP client /sever. It permits compound at once active GSM channels.

The VoiSmart Gateways support SIM server functionalities for isolated and central saving of any number of Smartcards /SIM. No additional hardware to be added, no fitting effort, no practical expertise necessary: An actual plug-and-play gadget, planned to make your business right away action. Think of it as a normal SIP client /server, and incorporation is done. LCR and smart routing of inward calls are instantly available, as well as all its powerful features.

Take a quick look at features

VoiSmart SIP/GSM Gateway; 4 channels SIP / IAX supported
All in one: no additional HW or SW essential
Trouble-free to integrate
Trouble-free to install
VoiSmart SIP/GSM Gateway; 4 channels , synchronized operation on 4 channels
SIM Server for remote storage and management
Open Source based (Asterisk)
Complete Least Cost Routing support
VoiSmart SIP/GSM Gateway; 4 channels ,Inward calls routing
Multicodec (G.711v, G.711a, g729, g726, ILBC, GSM)
Echo termination on GSM enginesHigh competence thanks to multiple channels operation

VoiSmart SI1

2009-08-06T08:35:00.000-07:00

VoiSmart SIP/GSM Gateway; 4 to 32 Channels
VoiSmart SIP/GSM Gateway; 4 to 32 channels capability
VoiSmart Voice Gateway is an Asterisk based IP Gateway which permits you to convert fixed to mobile into mobile to mobile traffic in the easiest and most competent way. It is a right “black box”, which can be achieved as a SIP client/sever. It permits many at once active GSM channels (4 to 32).

The VoiSmart Gateways carry SIM server functionalities for isolated and middle save of any numeral of Smartcards /SIM. No additional hardware to be added, no fitting effort, no practical talent mandatory: a genuine plug and play appliance, proposed to formulate your business right away running. Consider it as a normal SIP client /server, and mixing is complete. LCR and smart routing of inward calls are right away available, and all its prevailing features.

Take a quick look at features

VoiSmart SIP/GSM Gateway; 4 to 32 Channels 19 inch Rack increased
VoIP optimized motherboard
4 to 32 active SIMs concurrently (one vGSM4 card every 4 SIMs)
preset Antennas
Reverberation deletion on GSM engines
Linux OS, SW establishment on Asterisk
completely configurable for the incorporation towards outer applicationsMulticodec (G.711v, G.711a, g729, g726, ILBC, GSM)